6
EN
Master Page: Left
How To Attach/Detach The Lens
Hood
The provided lens hood helps block out glare when
shooting under bright sunlight, the same way
professional photographers do.
To attach:
Align the lens hood with the camcorder’s lens while
the index on the lens hood is facing upward, and
then screw the ring clockwise
a
.
To detach:
Turn the ring counterclockwise
b
.
How To Attach The Core Filter (for
optional S-Video cable)
Attach the core filter to an optional S-Video cable.
The core filter reduces interference.
1
Release the stoppers on both ends of the core
filter.
2
Run the cable through the core filter, leaving
approx. 3 cm of cable between the cable plug
and the core filter. Wind the cable twice around
the outside of the core filter as shown in the
illustration.
●
Wind the cable so that it is not slack.
3
Close the core filter until it clicks shut.
NOTES:
●
If the core filter cannot be attached to the S-Video
cable you have, use the optional YTU94146B
S-Video cable. Consult your nearest JVC dealer for
details on its availability.
●
Take care not to damage the cable.
●
When connecting a cable, attach the end with the
core filter to the camcorder.
How To Use The Audio Cable
When using optional headphones or external
microphone, connect to the provided Audio cable
(with a core filter attached), then connect the Audio
cable to the camcorder. The core filter reduces
interference.
Index
Threading
Ring
Stopper
3 cm
Wind twice.
Stereo headphones
Audio cable
(provided)
Core filter
Open the
connector cover.
To
(headphones)
Stereo microphone
To MIC
GR-DV4000PAL.book Page 6 Friday, February 14, 2003 10:30 PM
