JVC GR-FX101 Instructions Manual Download

Page: 14 / 61

RECORDING

Basic Recording

NOTE:

You should already have performed the procedures listed
below. If not, do so before continuing.

●

Power (

pg. 6)

●

Tape Length Setting (

pg. 10)

●

Recording Mode Setting (

pg. 10)

●

Grip Adjustment (

pg. 12)

●

Viewfinder Adjustment (

pg. 12)

LOAD A CASSETTE

Slide

EJECT

to open the cassette holder, then insert

the cassette with the label facing out. Press the Close
button to ensure the holder is closed and locked.

ENTER RECORD-STANDBY MODE

Turn the

LENS COVER

Open/Close Ring to open the

lens cover, then set the Power Switch to “CAMERA”
(“AUTO” or “PRO.”).

•The power lamp lights and the camcorder enters the

Record-Standby mode.

•The scene you are aimed at appears on the

viewfinder screen, with the word “PAUSE”
superimposed upon it.

START SHOOTING

Press the Recording Start/Stop Button.

•“

” appears in the viewfinder while recording is

in progress.

Power lamp

Power Switch Position

According to the Power Switch position you have selected, the following functions are available:

Power Switch

Recording Start/Stop Button

Allows you to record using
NO special effects or manual
adjustments. Suitable for
standard recording.

Allows you to switch off the
camcorder.

Allows you to set various
recording functions using the
menus. If you want more creative
capabilities than full auto
recording, try this mode.

AUTO
(Full Auto mode):

PRO.
(PRO. mode):

OFF:

EJECT Switch

LENS COVER
Open/Close Ring

Tally lamp
(lights while recording
is in progress)

Summary of Contents for GR-FX101





























































Search results

Summary of Contents for GR-FX101

Reviews:

Related manuals for GR-FX101

Brands by name

Popular brands

JVC GR-FX101, Instructions Manual

Search results

Summary of Contents for GR-FX101

Reviews:

Related manuals for GR-FX101

Brands by name

Popular brands