14
EN
RECORDING
Basic Recording
NOTE:
You should already have performed the procedures listed
below. If not, do so before continuing.
●
Power (
Z
pg. 6)
●
Tape Length Setting (
Z
pg. 10)
●
Recording Mode Setting (
Z
pg. 10)
●
Grip Adjustment (
Z
pg. 12)
●
Viewfinder Adjustment (
Z
pg. 12)
1
LOAD A CASSETTE
Slide
EJECT
to open the cassette holder, then insert
the cassette with the label facing out. Press
PUSH
to
ensure the holder is closed and locked.
2
ENTER RECORD-STANDBY MODE
Turn the
LENS COVER
Open/Close Ring to open the
lens cover, then set the Power Switch to “CAMERA”
(“AUTO” or “PRO.”).
•The power lamp lights and the camcorder enters the
Record-Standby mode.
•The scene you are aimed at appears on the
viewfinder screen, with the word “PAUSE”
superimposed upon it.
3
START SHOOTING
Press the Recording Start/Stop Button.
•“
” appears in the viewfinder while recording is
in progress.
Power lamp
Power Switch Position
According to the Power Switch position you have selected, the following functions are available:
Power Switch
Recording Start/Stop Button
Allows you to record using
NO special effects or manual
adjustments. Suitable for
standard recording.
Allows you to switch off the
camcorder.
Allows you to set various
recording functions using the
menus. If you want more creative
capabilities than full auto
recording, try this mode.
AUTO
(Full Auto mode):
PRO.
(PRO. mode):
POWER OFF:
EJECT Switch
LENS COVER
Open/Close Ring
Tally lamp
(lights while recording
is in progress)
