background image

64

 EN

Deleting Images

Previously shot images can be deleted either one at a time
or all at once.

1

SELECT OPERATION MODE

Set the Power Switch to “

” while pressing

down the Lock Button. Open the LCD monitor fully or
pull out the viewfinder fully.

•A stored image is displayed.

2

ACCESS PLAYBACK MENU

Press MENU/SET. The Playback Menu appears.

3

SELECT FUNCTION

Rotate MENU/SET to move the highlight bar to “FILE
DELETE” and press it. The FILE DELETE Screen
appears.

TO SELECT AN IMAGE BY BROWSING
IMAGES STORED IN MEMORY

Before doing the following, perform steps 1 through 3
above.

4

SELECT MODE

Rotate MENU/SET to select “SELECTED” and press it.
The DELETE Index Screen appears.

5

SELECT IMAGE

Rotate MENU/SET to move the green frame to the
desired image that you wish to delete and press it. An

” appears above the selected image.

Repeat this procedure for all images that you wish to
delete.
To deselect an image, press MENU/SET again. The

” disappears.

6

END SELECTION

Rotate MENU/SET upward to select “NEXT” and
press it. The Deletion Confirmation Screen appears.

7

DELETE IMAGE

Rotate MENU/SET to select “EXECUTE” and press it.
The selected images are deleted and the normal
playback screen appears.

•If you wish to cancel deletion, rotate MENU/SET to

select “CANCEL” and press it.

PLA

Y/P

C

OF

F

CA

ME

RA

5S DSC

DSC

PL

AY

0 0 1

F

0 0 2

S

0 0 3

E

0 0 5

F

0 0 4

F

N E X T           D E L E T E

0 0 6

F

OFF

IrTran-P
PROTECT

TITLE  DELETE
FORMAT

FILE  DELETE

OFF

INDEX
SLIDE  SHOW
MULTI  VIEW

END

4

ALL

SELECTED

CANCEL

FILE  DELETE

4

EXECUTE

CANCEL

4

Display

Power Switch

MENU/SET Dial

Lock Button

Power lamp

Playback Menu

FILE DELETE Screen

DELETE Index Screen

Normal playback

Deletion Confirmation
Screen

CAUTION:

While deleting images, never remove the
MultiMediaCard or disconnect power, as this may
cause the memory to be corrupted. Also, be sure to
use the AC Power Adapter/Charger, as a malfunction
may occur if the battery become exhausted halfway
through the operation.

PLAYBACK

  Advanced Features For D.S.C. (cont.)

Summary of Contents for GR-DVX7

















































































































Reviews: