JVC GR-DVM76 Page 71 Instructions Manual Download

Page: 71 / 104

Master Page: Right

GR-DVM96-76U_37-79.fm

Page 71

Load the provided memory card. (

墌

pg. 17)

Then, perform step

and

on page 70.

Press the

MENU

Wheel in. The Menu Screen

appears.

Rotate the

MENU

Wheel to select “

SYSTEM”,

and press it. The SYSTEM Menu appears.

Rotate the

MENU

Wheel to select “SOUND IN”,

and press it. The Sub Menu appears.

Rotate the

MENU

Wheel to select
“D.SOUND”, and
press it.

Rotate the

MENU

Wheel to select
“

RETURN”, and

press it twice. The
Menu Screen closes and the sound effect
indication appears.

Press

INDEX

to access the sound effects Index

Screen.

Rotate the

MENU

Wheel to select the desired

sound effect and press it.

Press

PLAY

(

) to begin Audio Dubbing. The

selected sound effect is dubbed onto the tape.

●

The “

” moves while it is being dubbed.

●

To stop dubbing the sound effect midway, press

D.SOUND

Press

STOP

(

) to end Audio Dubbing.

NOTES:

●

After dubbing, set “SOUND IN” back to “MIC”.

●

The dubbed sound effect is recorded on
SOUND 2. (

墌

pg. 51)

●

If you press

PAUSE

(

) to pause dubbing in step

the selected sound effect indication remains
displayed. To resume dubbing, press

PLAY

(

Audio Dubbing Using Digital
Sound Effects (GR-DVM96 only)

PAUSE

PLAY

A.DUB

STOP

Remote sensor

D.SOUND Button

MENU Wheel

APPLAUSE

D.SOUND

GR-DVM96-76U_37-79.fm Page 71 Friday, February 15, 2002 11:55 AM

Summary of Contents for GR-DVM76








































































































Search results

Summary of Contents for GR-DVM76

Reviews:

Related manuals for GR-DVM76

Brands by name

Popular brands

JVC GR-DVM76, Instructions Manual

Search results

Summary of Contents for GR-DVM76

Reviews:

Related manuals for GR-DVM76

Brands by name

Popular brands