EN
35
RETURN
SHEETS
DPOF
0 0
SHEETS
DPOF
0 5
DPOF
EXECUTE
SAVE?
CANCEL
TO PRINT BY SELECTING STILL IMAGES AND
NO. OF PRINTS
1
Perform steps
1
through
4
on pg. 34.
2
Rotate the
MENU/BRIGHT
wheel to select
“CURRENT” and press it. Selection is complete. The
DPOF Screen appears.
3
Press
2
or
3
so that the image you wish to
print appears.
4
Rotate the
MENU/BRIGHT
wheel to move the
highlight bar to the SHEETS number indication and
press it.
5
Select the number of prints by rotating the
MENU/
BRIGHT
wheel and press it.
Repeat steps
3
through
5
for the desired number of
prints.
• The number of prints can be set up to 15.
• To correct the number of prints, select the image
again and change the number.
6
Rotate the
MENU/BRIGHT
wheel to select
“RETURN” and press it. Selection is complete.
“SAVE?” appears.
• If you did not change any settings in step
3
through
5
, the Menu Screen reappears.
7
Rotate the
MENU/BRIGHT
wheel to select
“EXECUTE”, then press it to save the setting you
have just made.
• To cancel selection, rotate the
MENU/BRIGHT
wheel to select “CANCEL” and press it.
To Reset The No. Of Prints . . .
..... select “RESET” in step
5
on pg. 34. The number
of prints is reset to 0 for all still images.
CAUTION
While performing the above, never disconnect power, as
this may cause the memor y to be corrupted. For safety,
all buttons including the Power Switch are disabled in
step
6
.
NOTES:
●
“BATTERY LOW” appears if the battery remaining
power is too low.
●
If you load a memory card already set as shown above
in a printer compatible with DPOF, it will make prints of
the selected still images automatically.
●
To print images recorded on a tape, first dub them to a
memory card (
pg. 32).
MENU/BRIGHT Wheel
DPOF Screen
Display
Rewind Button (
2
)
VIDEO/MEMORY Switch
(Open the LCD monitor to
access this switch.)
Fast-Forward (
3
) Button
SELECT Button