manualshive.com logo in svg

JVC GR-DVL310, Instructions Manual, Page: 83 / 92

Share
Download
JVC GR-DVL310 Instructions Manual Download Page 83

EN

83

Indications

 Function

Displays the battery remaining power.

Remaining power level: high

Remaining power level: exhausted

As the battery power comes close to nil, the battery indicator 

 blinks.

When the battery power is exhausted, power turns off automatically.

Appears when no tape is loaded.

(

 pg. 12)

Appears when the erase protection tab is set to “SAVE” while the Power
Switch is set to “

” or “

” and the VIDEO/DSC Switch (GR-DVL557/

DVL555/DVL357/DVL355 only) is set to “VIDEO”.

(

 pg. 12)

Appears if dirt is detected on the heads during recording. Use an optional
cleaning cassette.

(

 pg. 86)

Appears if condensation occurs. When this indication is displayed, wait
more than 1 hour until condensation disappears.

Appears if a tape is not loaded when the Recording Start/Stop Button or
SNAPSHOT Button is pressed while the Power Switch is set to “

” or

“

” and the VIDEO/DSC Switch (GR-DVL557/DVL555/DVL357/DVL355

only) is set to “VIDEO”.

Appears when the tape ends during recording or playback.

(

 pg. 71)

Appears if a tape in another format is loaded.

●

Appears when the date/time is not set.

(

 pg. 11)

●

Appears when the built-in clock battery runs out and the previously set
date/time is erased. Consult your nearest JVC dealer for replacement.

Appears for 5 seconds after power is turned on if the lens cap is attached.

Appears if Audio Dubbing is attempted on a blank portion of a tape.

(

 pg. 66)

●

Appears if Audio Dubbing is attempted on a tape recorded in the LP
mode.

(

 pg. 66)

●

Appears if Audio Dubbing is attempted on a tape recorded in 16-bit
audio.

(

 pg. 66)

●

Appears if A. DUB (

e

) on the remote control is pressed when the erase

protection tab is set to “SAVE”.

(

 pg. 66)

Warning Indications

TAPE!

TAPE END

SET DATE/TIME!

CHECK TAPE’S ERASE

PROTECTION TAB

HEAD CLEANING

REQUIRED USE

CLEANING CASSETTE

CONDENSATION

OPERATION PAUSED

PLEASE WAIT

DIFFERENT

FORMATTED TAPE

A. DUB ERROR!

<CANNOT DUB

ON A LP RECORDED

TAPE>

<CANNOT DUB

ON A 16BIT

RECORDING>

<CHECK TAPE’S ERASE

PROTECTION TAB>

A. DUB ERROR!

CONTINUED ON NEXT PAGE

LENS CAP

Summary of Contents for GR-DVL310





























































































Reviews:

No comments