JVC GR-DVL105 Page 15 Instructions Manual Download

Page: 15 / 72

MULTI-9
Multi-Analyser 9

FULL
Snapshot mode
with no frame*

FRAME
Snapshot mode
with frame*

MULTI-4
Multi-Analyser 4

There is the sound effect of a shutter closing.

PIN-UP
Pin-Up mode*

NOTES:

●

Even if “MULTI-4” or “MULTI-9” is engaged, Snapshot
recording will be performed in the FULL mode during
Digital Zoom.

●

If Snapshot recording is not possible, “PHOTO” blinks
when

SNAPSHOT

is pressed.

●

If Programme AE with special effects (

墌

pg. 26) is

engaged, certain modes of Programme AE with special
effects are disabled during Snapshot recording. In such a
case, the icon blinks.

●

SNAPSHOT

is pressed when “DIS” is set to “ON”

(

墌

pg. 22), the Stabiliser will be disabled.

●

During playback as well, all Snapshot modes are
available. The shutter sound is not heard.

●

During Snapshot recording, the image displayed in the
viewfinder may be partially missing. However, there is
no effect in the recorded image.

●

When a cable is connected to the AV connector, the
shutter sound is not heard from the speaker, however it
is recorded onto the tape.

●

will appear while the snapshot is being taken.

Summary of Contents for GR-DVL105








































































Search results

Summary of Contents for GR-DVL105

Reviews:

Related manuals for GR-DVL105

Brands by name

Popular brands

JVC GR-DVL105, Instructions Manual

Search results

Summary of Contents for GR-DVL105

Reviews:

Related manuals for GR-DVL105

Brands by name

Popular brands