JVC GR-DLS1, Instructions Manual

Page: 79 / 92

EN
79
^
Progressive Dial (PROGRESSIVE)
(
Z
pg. 30, 46)
Turn for Progressive Video Recording or Pro
Snapshot Recording.
&
Progressive Button (
Z
pg. 30, 46)
When this button is pressed, the camcorder starts
Progressive Mode Recording (high resolution).
When pressed during playback, a playback
snapshot is taken.
*
OPEN/EJECT switch (
Z
pg. 14)
Slide the switch down when loading/unloading a
tape.
(
Speaker (
Z
pg. 52)
During playback, the sound can be heard.
)
PUSH-OPEN button (
Z
pg. 14)
Press to open the LCD monitor.
q
Power dial (
Z
pg. 20)
Turning the camcorder on/off, recording or
playback is possible.
w
MENU button (
Z
pg. 33)
Press this button to make the Menu appear.
ON/OFF button (
Z
pg. 24)
Press and hold this button for more than approx.
1 second to make the indications appear on the
LCD monitor or the viewfinder.
e
Function Navigator Dial (Select Dial)
(
Z
pg. 24, 33)
Adjusts the brightness of the LCD monitor or
selects the Menu etc. Referred to in this manual
as “Select Dial”.
r
START/STOP button (
Z
pg. 20)
Starts recording or stops recording to make the
camcorder enter the record-standby mode.
t
Viewfinder (
Z
pg. 17)
Pull out when recording.
1
Zoom switch or volume switch (VOL.)
(
Z
pg. 26, 52)
Adjusts zoom during recording or the sound
volume during playback.
2
Grip strap (
Z
pg. 16)
3
Lens hood
4
Tally lamp
Lights during recording.
5
Remote sensor (
Z
pg. 54)
Receives the signal from the remote control.
When using the remote control, point it at the
remote sensor.
6
Lens cover
Opens when the viewfinder is pulled out or the
LCD monitor is opened fully.
7
Stereo microphone (
Z
pg. 70)
For use when recording or audio dubbing.
8
External microphone input connector
(MIC) (Stereo) (
Z
pg. 70)
An optional microphone can be connected.
9
JLIP (Joint Level Interface Protocol)
(DIGITAL STILL) output connector
(
Z
pg. 60)
Outputs the digital still image to a personal
computer.
0
EDIT jack (
Z
pg. 65)
Using an editing cable, connect to the remote
control or VCR.
!
RESET button (
Z
pg. 76)
When a malfunction occurs, press this button
after removing the power supply (battery etc.).
Pressing this button also resets the date/time or
various settings.
@
Stop button (
5
) (
Z
pg. 52)
Stops playback of the tape.
#
Play/Pause button (
6
/
4
) (
Z
pg. 52)
Plays back or stops the tape temporarily.
$
Rewind button (
2
) (
Z
pg. 52)
Rewinds the tape.
%
Fast-Forward button (
3
) (
Z
pg. 52)
Fast-Forwards the tape.