VIDEO PLAYBACK
24
EN
MasterPage: Left
NOTES:
●
It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(
●
To monitor the picture and sound from the
camcorder without inserting a tape or memory
card, set the camcorder’s Power Switch to “
A
” or
“
M
”, then set your TV to the appropriate input
mode.
●
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
You can reproduce real three-dimensional
acoustic fields on a conventional TV, VCR, or
stereo system connected to the camcorder.
1
Shoot a video in Biphonic Recording mode.
2
Connect the camcorder to a TV, VCR, or
stereo system. (
3
Perform steps
4
Press
BIPHONIC
to change the setting.
“
A” or “
A”*: Biphonic mode is
automatically engaged when the camcorder
detects footage recorded with the Mic for
Biphonic while “AUX MIC” is set to “BIPHONIC”.
“
ON” or “
ON”*: Biphonic mode is
engaged.
No indication: Biphonic mode is disengaged.
* “
” appears when the camcorder detects
footage recorded while “AUX MIC” is set to “OFF”.
NOTES:
●
As long as you use the Mic for Biphonic, even if
“AUX MIC” is set to “OFF” on Biphonic Recording,
you can obtain a Biphonic effect by selecting
“
ON” on the playback.
●
Make sure that Biphonic mode is disengaged
when you use headphones at Biphonic playback
to obtain genuine Biphonic effect.
●
When you use a microphone other than the Mic
for Biphonic during Biphonic Recording, you
cannot obtain an expected effect even if “
ON”
or “
ON” is selected on the playback.
5
To start playback, press
4
/
9
.
NOTES:
●
Stereo speakers (incorporated in a TV) are
required for Biphonic playback.
●
Biphonic effect is maximized in the following
cases:
• When you enjoy the video on a big screen TV.
• When the distance between the left and right
speakers is sufficient.
• When you position at
front center of both
speakers.
Biphonic Playback
GR-DF565PAL.book Page 24 Thursday, January 27, 2005 12:30 PM
