EN
31
EN
GL
IS
H
It is also possible to copy recorded scenes from
the camcorder onto another video unit equipped
with a DV connector. Since a digital signal is sent,
there is little, if any, image or sound deterioration.
To use this camcorder as a player
Make sure all units are turned off.
Connect this camcorder to a video unit
equipped with a DV input connector using a
DV cable as shown in the illustration.
Start playback on the camcorder (
At the point you want to start dubbing, start
recording on the video unit. (Refer to the
video unit’s instruction manual.)
To stop dubbing, stop recording on the
video unit, then stop playback on this
camcorder.
Notes:
●
It is recommended to use the AC Adapter as
the power supply instead of the battery
pack.
●
If a blank portion or disturbed image is played
back on the player during dubbing, the dubbing
may stop so that an unusual image is not
dubbed.
●
Even though the DV cable is connected
correctly, sometimes the image may not appear
in step
. If this occurs, turn off the power
and make connections again.
●
When using a DV cable, be sure to use the
optional JVC VC-VDV204U or VC-VDV206U
DV cable.
Dubbing To A Video Unit
Equipped With A DV
Connector (Digital Dubbing)
Core filter
To DV OUT
DV cable (optional)
To DV IN
Video unit equipped with DV connector
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
4
5
5
5
5
4
4
4
4
Editing
GR-DA20EK.book Page 31 Thursday, August 2, 2007 12:08 PM
