manualshive.com logo in svg

JVC GR-D820EK, Instructions Manual

Share
Download
JVC GR-D820EK Instructions Manual Download Page 47

EN  

47

EN
G

L

ISH

If, after following the steps in the chart below, the problem still exists, please consult your nearest 
JVC dealer.  

 

Problem

Possible Cause

Remedy

Recording cannot be 
performed.

●

The tape’s erase 
protection tab is set to 
“SAVE”.

●

“TAPE END” appears.

●

The cassette holder cover 
is open.

H

Set the tape’s erase protection tab to 

“REC”

. (

墌

20)

H

Replace with new cassette (

墌

20).

H

Close the cassette holder cover.

When shooting a subject 
illuminated by bright light, 
vertical lines appear.

●

This is not a malfunction.

When the screen is under 
direct sunlight during 
shooting, the screen 
becomes red or black for 
an instant.

●

This is not a malfunction.

The focus does not adjust 
automatically.

●

Focus is set to the Manual 
mode.

●

The lens is dirty or covered 
with condensation.

H

Set Focus to the Auto mode (

墌

38).

H

Clean the lens and check the focus 
again (

墌

38).

The image looks like the 
shutter speed is too slow.

●

When shooting in the dark, 
the unit becomes highly 
sensitive to light when 
“GAIN UP” is set to 
“AUTO”.

H

If you want the lighting to look more 
natural, set “GAIN UP” to “AGC” or 
“OFF” (

墌

32).

Images on the LCD 
monitor appear dark or 
whitish.

●

In places subject to low 
temperature, images 
become dark due to the 
characteristics of the LCD 
monitor. This is not a 
malfunction.

H

Adjust the brightness and angle of the 
LCD monitor (

墌

14, 20).

Picture does not appear 
on the LCD monitor.

●

The LCD monitor’s 
brightness setting is too 
dark.

H

Adjust the brightness of the LCD 
monitor (

墌

20).

H

If the monitor is tilted upward 180 
degrees, open the monitor fully.

Aspect ratio is strange.

H

If the aspect ratio of the video you are 
playing is strange, change the setting 
in “WIDE TV” (

墌

31, 34).

No power is supplied.

●

The power is not 
connected properly.

●

The battery pack is not 
attached firmly.

●

The battery is dead.

H

Connect the AC Adapter securely 
(

墌

18).

H

Detach the battery pack once again 
and re-attach it firmly (

墌

18).

H

Replace the dead battery with a fully 
charged one (

墌

18).

Troubleshooting

GR-D820EK_GR-D860EK.book  Page 47  Monday, November 19, 2007  10:15 AM

Summary of Contents for GR-D820EK

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands