background image

FEATURES FOR RECORDING

36 

EN

MasterPage: Left

Like the pupil of the human eye, the iris 
contracts in well-lit environments to keep too 
much light from entering, and dilates in dim 
environments to allow in more light.
Use this function in the following situations:

When shooting a moving subject.

When the distance to the subject changes (so 
its size in the LCD monitor or the viewfinder 
changes), such as when the subject is backing 
away.

When shooting on a reflective natural 
background such as at the beach or when 
skiing.

When shooting objects under a spotlight.

When zooming.

1

Perform steps 

1

 - 

6

 in “Exposure Control” 

(

 pg. 35)

2

Adjust zoom so that the subject fills the 

LCD monitor or the viewfinder, then press and 
hold 

SET

 or 

2

 for over 2 seconds. The “

” 

indication appears.

3

Press 

SET

 or 

2

. The iris is locked.

4

Press 

MENU

Backlight compensation brightens the subject 
quickly.
With simple operation, backlight compensation 
feature brightens the dark subject portion by 
increasing the exposure.

1

Set the Power Switch to 

“REC”.

2

Set the recording mode to 

M

. (

 pg. 20)

3

Press 

 so that the 

Backlight Compensation 
indicator “

” appears.

To cancel Backlight Compensation

Press 

 twice so that the “

” indicator 

disappears.

NOTE:

Using Backlight Compensation may cause the 
light around the subject to become too bright and 
the subject to become white. 

Selection of a spot metering area enables 
more precise exposure compensation. 

1

Set the Power Switch to “REC”.

2

Set the recording mode to “

M

(

 pg. 20)

3

Press 

 twice so that the Spot Exposure 

Control indicator “

” appears.

A spot metering area frame appears at the 
center of the LCD monitor/viewfinder.

4

Press 

SET

.

Spot Exposure Control is engaged.

Exposure is adjusted to make the brightness of 
the selected area most appropriate.

To lock the iris

After step 

3

, press and hold 

SET

 over 2 

seconds. The “

” indication appears and the 

iris is locked.

To cancel Spot Exposure Control

Press 

 once so that the “

” indicator 

disappears.

NOTES:

Depending on the shooting location and 
condition, optimum result may not be attained. 

“STROBE” in “EFFECT” cannot be used with 
Spot Exposure Control.

Iris Lock

Backlight Compensation

SET

Spot Exposure Control

GR-D770US_EN.book  Page 36  Friday, December 15, 2006  2:11 PM

Summary of Contents for GR-D770U

















































Reviews: