VIDEO RECORDING
18
EN
MasterPage: Left
Time Code
During recording, a time code is recorded on
the tape. This code is to confirm the location of
the recorded scene on the tape during
playback.
* Frames are not displayed during recording.
If recording starts from a blank portion, the
time code begins counting from “00:00:00”
(minute:second:frame). If recording starts from
the end of a previously recorded scene, the
time code continues from the last time code
number. If during recording a blank portion is
left partway through the tape, the time code is
interrupted. When recording is resumed, the
time code starts counting up again from
“00:00:00”. This means the camcorder may
record the same time codes as those existing
in a previously recorded scene. To prevent this,
perform Recording From The Middle Of A Tape
(
pg. 18) in the following cases;
●
When shooting again after playing back a
recorded tape.
●
When power shuts off during shooting.
●
When a tape is removed and re-inserted during
shooting.
●
When shooting using a partially recorded tape.
●
When shooting on a blank portion located
partway through the tape.
●
When shooting again after shooting a scene
then opening/closing the cassette holder cover.
NOTES:
●
The time code cannot be reset.
●
During fast-forwarding and rewinding, the time
code indication does not move smoothly.
●
The time code is displayed only when “TIME
CODE” is set to “ON”. (
Recording From The Middle Of A Tape
1)
Play back a tape or use Blank Search
pg. 20) to find the spot at which you want
to start recording, then engage the Still
Playback mode. (
2)
Set the Power Switch to “REC” while
pressing down the Lock Button located on the
switch, then start recording.
Auto/Manual Mode
Press
AUTO
button repeatedly to switch to
auto/manual recording mode. When manual
mode is selected, the indicator “
M
” appears
on the LCD monitor.
Auto Mode :
A
You can record using no special effects or
manual adjustments.
Manual Mode :
M
Manual recording is possible by setting various
functions
.
12 : 34 : 24
Minutes
Seconds
Frames*
(25 frames =
1 second)
Display
MANUAL
AUTO
GR-D750AH_EN.book Page 18 Tuesday, January 9, 2007 7:47 PM
