EN
23
VIDEO PLAYBACK
MasterPage: Start_Right
VI
DEO R
E
CO
RD
ING
& PLA
YBACK
A
Black to S-VIDEO IN* (Connect when your
TV/VCR has S-VIDEO in and A/V input
connectors. In this case, it is not necessary to
connect the yellow video cable).
B
Yellow to VIDEO IN (Connect when your
TV/VCR has only A/V input connectors).
C
Red to AUDIO R IN
D
White to AUDIO L IN
* For GR-D740EK only
NOTE:
The S-Video cable is optional. Be sure to use the
YTU94146A S-Video cable. Consult the JVC
Service Centre described on the sheet included in
the package for details on its availability. Make sure
to connect the end with a core filter to the camera.
The core filter reduces interference.
1
Make sure all units are turned off.
2
Connect the camcorder to a TV or VCR as
shown in the illustration.
If using a VCR
, go to step
3
.
If not
, go to step
4
.
3
Connect the VCR output to the TV input,
referring to your VCR’s instruction manual.
4
Turn on the camcorder, the VCR and the TV.
5
Set the VCR to its AUX input mode, and set
the TV to its VIDEO mode.
6
Start playback on the camcorder. (
墌
pg. 21)
●
Please set “16:9 OUTPUT” of Playback Menus so
that the image may suit your TV (16:9 TV or 4:3
TV). (
墌
pg. 17, 28)
To choose whether or not the following
displays appear on the connected TV
●
Date/Time
Set “DATE/TIME” to “ON” or “OFF”.
(
墌
pg. 28)
●
Time Code
Set “TIME CODE” to “ON” or “OFF”. (
墌
pg. 28)
●
Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.
(
墌
pg. 28)
NOTES:
●
It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(
墌
pg. 14)
●
To monitor the picture and sound from the
camcorder without inserting a tape, set the
camcorder’s Power Switch to
“REC”
, then set
your TV to the appropriate input mode.
●
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
Connections To A TV Or VCR
4
s
A
C
B
TV
VCR
Audio/Video
cable
(provided)
To AV
connector
*S cable
(optional)
or
GR-D720EK_GR-D740EK.book Page 23 Wednesday, January 31, 2007 4:04 PM
