1-14 (No.86733)
2.5.2 Disassembly of MONITOR ASSEMBLY (3.5 INCH)
NOTE:
Be careful in removing or handling the monitor assembly, es-
pecially not to soil or scratch the monitor screen during the dis-
assembly procedure.
(1) While removing the four screws (1 to 4) in numerical order
and then disengaging the four hooks (L10a-L10d) in alpha-
betical order, open and remove the MONITOR COVER
ASSEMBLY.
(2) Remove the SENSOR BOARD ASSEMBLY from the
MONITOR CASE.
(3) Disconnect the FPC in the connectors CN10a and CN10b
in this order, and then remove the MONI.HINGE ASSEM-
BLY.
(4) Disconnect the FPC of the LCD MODULE from the connec-
tor CN10c.
(5) Remove one screw (5) and then remove the BL BOARD
ASSEMBLY together with the BACK LIGHT.
NOTE 10:
Since the BACK LIGHT is soldered to the BL BOARD
ASSEMBLY, the BACK LIGHT should not be separated
from the BL BOARD ASSEMBLY except when replacing
them.
(6) While removing the five hooks (L10e-L10i) in alphabetical
order, remove the LCD FRAME together with the LCD
MODULE.
(7) Remove the SHIELD CASE.
Fig.2-5-2
L10a
L10d
L10b
L10c
CN10b
CN10c
L10i
CN10a
L10h
L10g
L10e
L10f
2
(S10a)
a
b
MONI.HINGE
ASSEMBLY
SENSOR BOARD
ASSEMBLY
a
1
(S10a)
3
(S10b)
4
(S10b)
5
(S10a)
BACK LIGHT
NOTE10
SHIELD CASE
MONITOR CASE
LCD MODULE
BL-3.5 BOARD
ASSEMBLY
MONITOR COVER
ASSEMBLY
LCD FRAME
b
:0.069N
.
m (0.7kgf
.
cm)
:0.098N
.
m (1.0kgf
.
cm)
