JVC GR-D650AS, Instructions Manual

Page: 40 / 112

FEATURES FOR RECORDING
40
EN
MasterPage: Left
Backlight compensation brightens the subject
quickly.
With simple operation, backlight compensation
feature brightens the dark subject portion by
increasing the exposure.
1
Set the Power Switch to “REC”.
2
Press BACKLIGHT so that the Backlight
Compensation indicator “ ” appears.
To cancel Backlight Compensation
Press BACKLIGHT twice so that the “ ”
indicator disappears.
NOTE:
Using Backlight Compensation may cause the light
around the subject to become too bright and the
subject to become white.
Selection of a spot metering area enables more
precise exposure compensation. You can select
one of the three metering areas on the LCD
monitor/viewfinder.
1
Set the Power Switch to “REC”.
2
Set the recording mode to “
M
”.
(
pg. 16)
3
Press BACKLIGHT twice so that the Spot
Exposure Control indicator “ ” appears.
●
A spot metering area frame appears at the
centre of the LCD monitor/viewfinder.
4
Press 1 or 2 to select the desired spot
metering area frame.
5
Press SET .
●
Spot Exposure Control is engaged.
●
Exposure is adjusted to make the brightness of
the selected area most appropriate.
To lock the iris
After step
4
, press and hold SET over 2
seconds. The “ ” indication appears and the iris
is locked.
To cancel Spot Exposure Control
Press BACKLIGHT once so that the “ ”
indicator disappears.
NOTES:
●
You cannot use the Spot Exposure Control at the
same time with following functions.
• “16:9” in “WIDE MODE” ( pg. 37)
• “STROBE” in EFFECT ( pg. 42)
•
Digital Zoom ( pg. 21)
●
Depending on the shooting location and condition,
optimum result may not be attained.
The white balance refers to the correctness of
colour reproduction under various lighting. If the
white balance is correct, all other colours will be
accurately reproduced.
The white balance is usually adjusted
automatically. However, more advanced
camcorder operators control this function
manually to achieve a more professional colour/
tint reproduction.
To change the setting
Set “W. BALANCE” to the desired mode.
(
pg. 32)
●
The selected mode indicator except “AUTO”
appears.
[AUTO] : White balance is adjusted
automatically.
MWB : Adjust the white balance manually
when shooting under various types of lighting.
(
“Manual White Balance Adjustment”, pg. 41)
FINE : Outdoors on a sunny day.
CLOUD : Outdoors on a cloudy day.
[ ] = Factory-preset
To return to automatic white balance
Set “W. BALANCE” to “AUTO”. ( pg. 32)
Backlight Compensation
Spot Exposure Control
White Balance Adjustment
GR-D650AS_EN.book Page 40 Saturday, April 22, 2006 1:51 PM