JVC GR-D650AS, Instructions Manual

Page: 43 / 112

EN
43
MasterPage: Start_Right
ADV
ANCED FEA
TURES
EDITING
1
Yellow to VIDEO IN or OUT
2
Red to AUDIO R IN* or OUT
3
White to AUDIO L IN* or OUT
4
To S-VIDEO IN or OUT (Connect when your
TV/VCR has an S-VIDEO IN/OUT connector.
In this case, it is not necessary to connect the
yellow video cable).
* Not required for watching still images only.
NOTE:
The S-Video cable is optional. Be sure to use the
YTU94146A S-Video cable. Consult the JVC
Service Sentre described on the sheet included in
the package for details on its availability. Make sure
to connect the end with a core filter to the camera.
The core filter reduces interference.
To use this camcorder as a player
1
Following the illustrations, connect the
camcorder and the VCR’s input connectors.
2
Start playback on the camcorder. ( pg. 23)
3
At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR’s
instruction manual.)
4
To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
NOTES:
●
It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(
pg. 15)
●
To choose whether or not the following displays
appear on the connected TV
• Date/time
Set “DATE/TIME” to “ON” or “OFF”.
(
pg. 32, 36) Or, press DISPLAY on the
remote control to turn on/off the date indication.
•
Time code
Set “TIME CODE” to “OFF” or “ON”.
(
pg. 32, 36)
• Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/
TV”. (
pg. 32, 36)
To use this camcorder as a recorder
1
Following the illustrations, connect the
camcorder and the VCR’s output connectors.
2
Set “REC MODE” to “SP” or “LP”. ( pg. 33)
3
Set the camcorder’s Power Switch to “PLAY”
4
Set “S/AV INPUT” to “ON”. ( pg. 36)
5
Press the Recording Start/Stop Button to
engage the Record-Pause mode.
●
The “ ” or “ ” iindication appears on
the screen.
6
Start playback on the player.
7
At the point you want to start dubbing, press
the Recording Start/Stop Button to start
dubbing. The
indication rotates.
8
Press the Recording Start/Stop Button again
to stop dubbing. The indication stops
rotating.
9
Press
7
to return to the normal playback
mode.
NOTES:
●
After dubbing, set “S/AV INPUT” back to “OFF”.
●
Analogue signals can be converted to digital
signals with this procedure.
●
It is also possible to dub from another camcorder.
Dubbing To Or From A VCR
2 4 1 3
Audio/Video
cable
(provided)
To AV
connector
To S connector
S Cable
(optional)
TV
VCR
A/V IN S IN
GR-D650AS_EN_07Advanced.fm Page 43 Tuesday, July 25, 2006 7:10 PM