JVC GR-D350AS, Instructions Manual

Page: 15 / 88

EN
15
GETTING STARTED
MasterPage: Start_Right
GETTING ST
AR
TED
The date/time is recorded onto the tape at all
times, but its display can be turned on or off
during playback. (
pg. 24)
1
Perform steps
1
–
4
in “Language Settings”
on page 14.
2
Press 3 or 4 to select “CLOCK ADJ.”, and
press SET or 2 . The date display format is
highlighted.
3
Press 3 or 4 to select the desired date
display format, then press SET or 2 . Select from
“MONTH.DATE.YEAR”, “DATE.MONTH.YEAR”
or “YEAR.MONTH.DATE”.
4
Press
3
or
4
to select the time display
format, then press SET or 2 . Select from “24h”
or “12h”.
5
Set the year, month, day, hour and minute.
Press 3 or 4 to select the value, then press SET
or 2 . Repeat this step until you have input all the
settings.
NOTE:
Press
1
to MENU return to the previous setting.
6
Press MENU .The Menu
screen closes.
1
Adjust the velcro strip.
2
Pass your right hand
through the loop and grasp
the grip.
3
Adjust your thumb and
fingers through the grip to
easily operate the
Recording Start/Stop
Button, Power Switch and
Power Zoom Lever. Be
sure to fasten the velcro strip to your preference.
1
Set the Power Switch to “REC” while pressing
down the Lock Button located on the switch.
2
Make sure the LCD monitor is closed and
locked. Pull out the viewfinder fully and adjust it
manually for best viewability.
3
Turn the Diopter Adjustment Control until the
indications in the viewfinder are clearly focused.
CAUTION:
When retracting the viewfinder, take care not to
pinch your fingers.
1
Set the Power Switch
to “REC” or “PLAY” while
pressing down the Lock
Button located on the
switch.
2
Open the LCD monitor
fully. ( pg. 17)
÷
To adjust the brightness of
the viewfinder, pull out the
viewfinder fully and set
“PRIORITY” to “FINDER”
(
pg. 23, 24).
3
Press MENU . The
Menu Screen appears. If
you are in Playback mode,
please proceed to Step
5
.
4
Press 3 or 4 to select “DISPLAY”, and press
SET or >. The DISPLAY Menu appears.
5
Press 3 or 4 to select “BRIGHT”, and press
SET or
2
. The Menu Screen closes and the
brightness control indicator appears.
6
Press 3 or 4 until the appropriate brightness
is reached and press SET or 2 .
7
Press MENU . The menu screen closes.
Date/Time Settings
Grip Adjustment
CLOCK ADJ .
D I SPLAY
M NTH
1
3 : 0 0 1
1 2 0 06
2 4 h
. .
DATE YEAR . . O
Viewfinder Adjustment
Brightness Adjustment Of The
Display
Diopter Adjustment Control
Example:
–1 BRIGHT
MENU
GR-D350AS_EN.book Page 15 Friday, March 24, 2006 12:16 PM