GETTING STARTED
8
EN
MasterPage: Left
To turn on the camcorder, set the Power Switch to any
operation mode except “OFF (CHARGE)” while pressing
down the Lock Button located on the switch.
Choose the appropriate operation mode according to
your preference using the Power Switch.
Power-Linked Operation
When the Power Switch is set to “
A
” or “
M
”, you can also
turn on/off the camcorder by opening/closing the LCD
monitor or pulling out/pushing in the viewfinder.
INFORMATION:
The following explanations in this manual supposes the
use of LCD monitor in your operation. If you want to use
the viewfinder, close the LCD monitor and pull out the
viewfinder fully.
The date/time is recorded onto the tape at all times, but
its display can be turned on or off during playback.
(
1
Set the Power Switch to “
M
” while pressing down the
Lock Button located on the switch.
2
Open the LCD monitor fully. (
3
Press the
M
MENU/VOL.
Wheel in. The Menu Screen
appears.
4
Rotate the
M
MENU/VOL.
Wheel to select “
n
”, and press it.
The CAMERA DISPLAY Menu
appears.
5
Rotate the
M
MENU/VOL.
Wheel to select “CLOCK ADJ.”,
and press it. The parameter for
“Month” is highlighted.
6
Rotate the
M
MENU/VOL.
Wheel to input the month, and
press it. Repeat to input the day,
year, hour and minute.
7
Rotate the
M
MENU/VOL.
Wheel to select “
B
RETURN”, and
press it twice. The Menu Screen closes.
NOTE:
Even if you select “CLOCK ADJ.”, if the parameter is not
highlighted, the camcorder’s internal clock continues to
operate. Once you move the highlight bar to the first date/
time parameter (month), the clock stops. When you finish
setting the minute and press the
M
MENU/VOL.
Wheel in, the
date and time begin operation from the date and time you
have just set.
1
Set the Power Switch to “
A
” or “
M
” while pressing
down the Lock Button located on the switch.
2
Make sure the LCD monitor is closed and locked. Pull
out the viewfinder fully and adjust it manually for best
viewability.
3
Turn the Diopter Adjustment Control until the
indications in the viewfinder are clearly focused.
CAUTION:
When retracting the viewfinder, take care not to pinch your
fingers.
Operation Mode
Power Switch Position
A
(Full Auto Recording):
Allows you to record using NO special effects or
manual adjustments. Suitable for standard recording.
The “
A
” indicator appears on the display.
M
(Manual Recording):
Allows you to set various recording functions using the
Menus. (
If you want more creative capabilities than Full Auto
Recording, try this mode.
There is no indication on the display.
OFF
:
Allows you to switch off the camcorder.
PLAY:
●
Allows you to play back a recording on the tape.
●
Allows you to set various playback functions using
the Menus. (
Date/Time Settings
POWER/CHARGE lamp
Power Switch
Lock Button
M
MENU/VOL.
Viewfinder Adjustment
LC
–
N
RETUR
T
/
D
AU
ME
T
–
/ T I
DA E
O
T
OF
DE
M
–
CO
T I E
F
DE
O K
CL C
2
C
J
AD .
3
:
5
LA
D
A
S
ERA
C M
I
Y
P
V
5'0 4
0 PM
N
CRE
ON S
I HT
BR G
E
N
RETUR
O K
CL C
2
J
AD .
3
:
5
LA
D
A
S
ERA
C M
I
Y
P
5'0 4
0 PM
DEC
PAUSE
Diopter Adjustment Control
GR-D32US.book Page 8 Friday, November 21, 2003 9:31 AM
