EN
EN
EN
EN
''''
Master Page: Right-start
AU
TO
MA
TIC DEMONSTRA
TION
Automatic Demonstration takes place when “DEMO
MODE” is set to “ON” (factory-preset).
䡲
Automatic Demonstration starts when there is no
operation for about 3 minutes after the Power
Switch is set to “
A
” or “
M
” and no cassette is in
the camcorder.
䡲
Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minute after that, the demonstration will
resume.
䡲
“DEMO MODE” remains “ON” even if the
camcorder power is turned off.
To cancel Automatic Demonstration
1
Set the Power Switch to “
M
” while pressing down
the Lock Button located on the switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
3
Press
MENU
. The Menu Screen appears.
4
Press + or – to select “
s
”, and press
SELECT/
SET
. The SYSTEM Menu appears.
5
Press + or – to select “DEMO MODE”, and press
SELECT/SET
. The Sub Menu appears.
6
Press + or – to select “OFF”, and press
SELECT/
SET
.
7
Press + or – to select “
B
RETURN”, and press
SELECT/SET
twice. The normal screen appears.
NOTE:
Detach the lens cap to see the actual changes of the
Automatic Demonstration activated on the LCD
monitor or viewfinder.
Automatic Demonstration
ST
M
SY
E
DE
M
–
MO
DE O
N
O
OFF
Power Switch
Lock Button
MENU Button
Sub Menu
SELECT/SET
Button
+/- Button
GR-D200US.book Page 9 Friday, April 11, 2003 1:05 PM
