JVC GR D 240 Instructions Manual Download

Page: 25 / 48

MENUS FOR DETAILED ADJUSTMENT

MasterPage: Start_Right

ADV

SYSTEM

The “

SYSTEM” functions which are set when

the Power Switch is set to “

” are also applied

when the Power Switch is set to “PLAY”.

[ ]

= Factory-preset

OFF

: Even though not heard while shooting,

shutter sound is recorded on the tape.

BEEP

: The beep sounds when the power is

turned on or off, and at the beginning and end of
recording. It also activates the shutter sound
effect. (

墌

pg. 29)

[MELODY]

: Instead of a beep, a melody sounds

when any operation is performed. It also
activates the shutter sound effect. (

墌

pg. 29)

OFF

: Disables the remote control operations.

[ON]

: Enables the remote control operations.

It is recommended that this function be set to
“OFF” to prevent improper operation.

OFF

: Automatic demonstration will not take

place.

[ON]

: Demonstrates certain functions such as

Program AE with special effects, etc., and can
be used to confirm how these functions operate.
Demonstration starts in the following cases:

●

When the Menu Screen is closed after “DEMO
MODE” is turned “ON”.

●

With “DEMO MODE” set to “ON”, if there is no
operation for about 3 minutes after the Power
Switch is set to “

” or “

”.

●

Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will
resume.

NOTES:

●

If a cassette is in the camcorder, the
demonstration cannot be turned on.

●

“DEMO MODE” remains “ON” even if the
camcorder power is turned off.

●

If “DEMO MODE” remains “ON”, some functions
will not be available. After viewing demo, set to
“OFF”.

[LCD]

: The image is displayed on the LCD

monitor when the viewfinder is pulled out while
the LCD monitor is opened.

FINDER

: The image is displayed in the

viewfinder when the viewfinder is pulled out
while the LCD monitor is opened.

EXECUTE

: Resets all settings to the factory-

preset.

[RETURN]

: Does not reset all settings to the

factory-preset.

BEEP

REMOTE

DEMO MODE

PRIORITY

CAM RESET

GR-D240PAL.book Page 25 Wednesday, November 17, 2004 7:32 PM

Summary of Contents for GR D 240

















































Search results

Summary of Contents for GR D 240

Reviews:

Related manuals for GR D 240

Brands by name

Popular brands

JVC GR D 240, Instructions Manual

Search results

Summary of Contents for GR D 240

Reviews:

Related manuals for GR D 240

Brands by name

Popular brands