JVC GR-AXM710 Instructions Manual Download

Page: 6 / 84

Using the battery pack

Hook its end to the camcorder (

) and push the

battery pack in until it locks in place (

(Charging procedure,

pg. 10)

To remove the battery pack

Slide BATTERY RELEASE and pull out the battery
pack.

QUICK OPERATION GUIDE (VIDEO)

Set the System Select Switch to “VIDEO”.

Set the Power Switch to “PLAY”.

Press REW (

— The tape will automatically stop at the

beginning of the tape.

Press PLAY/PAUSE (

— Playback starts and the playback picture

appears.

• To stop playback, press STOP (

(For more details,

pg. 46.)

• The viewfinder switches off automatically to

save power when the LCD monitor is opened

at an angle of over 60 degrees.

• The LCD monitor turns on/off when it is

opened/closed at approx. 60 degrees.

Or simply play back the tape on a VHS VCR

using the Cassette Adapter (VHS Playpak).

pg. 49

Turn the LENS COVER Open/Close Ring to
open the lens cover.

Set the System Select Switch to “VIDEO”.

Set the Power Switch to “AUTO” or “PRO.”.
— The power lamp will light and an image

will appear.

Press the Recording Start/Stop Button.
— Recording starts.

•To stop recording temporarily, momentarily

press the Recording Start/Stop Button once
again.

(For more details,

pgs. 18 – 21)

•The viewfinder switches off automatically to

save power when the LCD monitor is opened
at an angle of over 60 degrees.

•The LCD monitor turns on/off when it is

opened/closed at approx. 60 degrees.

SUPPLY POWER

INSERTING A VIDEO
CASSETTE

PLAYBACK

SHOOTING

Open the LCD monitor to an angle of over 60
degrees.

Slide EJECT to open the cassette holder.

Insert a video cassette.

Press PUSH to close the cassette holder.

(For more details,

pg. 15)

Set to “PLAY”

PUSH Button

EJECT Switch

Hook on.

Push in.

BATTERY RELEASE

LENS COVER
Open/Close Ring

Set to “AUTO”
or “PRO.”

Recording Start/Stop Button

REW (

) Button

STOP (

) Button

Set to “VIDEO”

The image you shoot is recorded onto a video tape.

PLAY/PAUSE
(

) Button

Summary of Contents for GR-AXM710




















































































Search results

Summary of Contents for GR-AXM710

Reviews:

Related manuals for GR-AXM710

Brands by name

Popular brands

JVC GR-AXM710, Instructions Manual

Search results

Summary of Contents for GR-AXM710

Reviews:

Related manuals for GR-AXM710

Brands by name

Popular brands