48
EN
P
FINE 12
P
No display
22
21
1
0
DIGITAL STILL CAMERA (D.S.C.) SHOOTING
Basic Shooting
When shooting a still image, it is not recorded onto the
tape, but it is stored in the camcorder's built-in memory
in the selected Picture Mode. A stored still image data
can be transferred to a PC, saved, and processed using a
Paint Software programme (
Z
pg. 63). A still image
processed on the PC can be also inserted onto a tape
(
Z
pg. 63).
SELECT MODE
1
Slide the LENS COVER Open/Close Switch to open
the lens cover, then set the System Select Switch to
“D.S.C.”. Set the Power Switch to “CAMERA”.
•The power indicator lights and an image appears.
SELECT PICTURE MODE
2
Set “PICTURE” to “FINE” or “STANDARD” in the
Menu Screen (
Z
pg. 49) as required.
To select in the Full Auto mode . . .
.... turn the Select Dial to AUTO LOCK. Go to step 4.
To shoot using various functions . . .
.... turn the Select Dial to any position except
AUTO LOCK. Go to step 3.
•There are two modes: FINE allows you to shoot up
to approx. 22 still images with higher resolution,
and STANDARD allows you to shoot up to
approx. 44 still images with lower resolution.
SELECT SNAPSHOT MODE
3
Press the MODE Button to switch from one mode to
the other until the desired setting appears as shown
in the illustration to the left.
SHOOT
4
Press the SNAPSHOT Button.
•A still image is stored in the built-in memory and
displayed for approx. 2 seconds. While the still
image remains displayed, that image is in the
process of being stored in memory, and it is
therefore impossible to take another shot during
that time. When the still image disappears and the
scene you are currently aimed at appears on the
screen, you may take another shot.
•The remaining number of shots available is
displayed.
NOTES:
●
The remaining number of shots varies according to the
selected Picture Mode. In the “STANDARD” mode,
twice as many still images can be shot as in the “FINE”
mode.
●
Six sample images have been stored in the built-in
memory at the factory.
If you wish to delete them, first remove the “Protect”
function (
Z
pg. 59), then perform the “Delete”
function (
Z
pg. 60)
Pin-Up
A still image on a white
background. A shadow
effect is added to give it
a three dimensional feel.
Full
A still image that
occupies the entire
image field is stored.
SNAPSHOT
Pictrue mode display
Remaining number
of shots
LCD monitor or
viewfinder
MODE
(Full)
(Pin-Up)
Set to “D.S.C.”
(Blinking)
Summary of Contents for GR-AXM500
Page 87: ...EN 87 ...
