JVC GR-AXM368EG Instruction Manual Download

Page: 33 / 46

PLAYBACK

Basic Playback

LOAD A CASSETTE

First open the LCD monitor to an angle of over 45
degrees. Press

EJECT

to open the cassette holder,

then insert the cassette with the label facing out.
Press

PUSH

to ensure the holder is closed and

locked.

SELECT MODE

Make sure the LCD monitor is fully open. Then set
the Power Switch to “PLAY”. The power indicator
lights.

PLAY BACK

Press

PLAY/PAUSE

. The playback picture appears.

STOP PLAYBACK

Press

STOP

Rewind or Fast-forward the tape

Press

REW

to rewind, or

to fast-forward the tape

during Stop mode.

NOTES:

●

The camcorder shuts off automatically after about 5
minutes in Stop mode. To turn on again, set the Power
Switch to “POWER OFF”, then to “PLAY”.

●

When the Power Switch is set to “PLAY” and the LCD
monitor is opened at an angle of 45 degrees or more,
the LCD monitor switches on and the viewfinder
switches off automatically to save power.

●

The playback picture can also be viewed in the
viewfinder (with the LCD monitor shut) or on a
connected TV (

pg. 38). Camcorder operation is the

same as described in this section.

●

You can also view the playback picture on the LCD
monitor with it flipped over and retracted.

●

LCD monitor/viewfinder indications:

•

The indication marked with

is displayed for approx.

5 seconds on the LCD monitor when the LCD
monitor is turned on, and then it disappears.
However, the battery pack remaining power indicator
“

” blinks when the power is almost gone.

•

During Stop, Fast-Forward or Rewind mode, none of
the indications are displayed in the viewfinder.

M–0: 23 : 45

PLAY/PAUSE

STOP

REW

LCD Monitor in Retracted Position

Tape running
indicator

: Playback

: Fast-Forward/

Forward Search

: Rewind/Reverse

Search

: Still Playback

Tape counter

Battery pack remaining power indicator*

LCD monitor/

viewfinder

indications

Power Switch

Recording mode indicator

Summary of Contents for GR-AXM368EG















































Search results

Summary of Contents for GR-AXM368EG

Reviews:

Related manuals for GR-AXM368EG

Brands by name

Popular brands

JVC GR-AXM368EG, Instruction Manual

Search results

Summary of Contents for GR-AXM368EG

Reviews:

Related manuals for GR-AXM368EG

Brands by name

Popular brands