16
Using The Cassette Adapter
Use this to play back an S-VHS-C/VHS-C video
cassette recorded with this camcorder on a S-VHS/
VHS VCR.
1)
Slide the battery cover up to remove it, install
one “AA (R6)” size battery, then reattach the
cover.
2)
Slide the latch to open the compartment door,
then insert the cassette and close the
compartment door.
3)
Load the cassette adapter into the VCR and
play the tape back.
4)
Slide the latch and the compartment door opens
automatically. This may take around 10 seconds.
Do not attempt to force the adapter open. Then,
insert your finger in the hole, and push up and
remove the cassette.
• During tape loading and unloading, do not touch
the reels for safety and tape protection.
• Tapes recorded in S-VHS or S-VHS ET mode
cannot be played back on a regular VHS VCR.
Playback is possible with a VCR equipped with
the S-VHS or SQPB (S-VHS QUASI PLAYBACK)
function.
• During special-effect playback (slow motion, still
frame, etc.), the picture may vibrate or noise bars
may appear on the screen.
• To record on a VCR using a compact cassette
and the adapter, cover the adapter’s recording
safety hole with adhesive tape.
Connection To A Personal Computer
You can transfer image data from the camcorder to
a PC using Digital Photo Navigator. When
connecting to your PC, refer to the instruction
manuals of the PC and Setup Guide for the
provided software.
When connecting to a Macintosh
. . .
The optional KEYSPAN USA-19 USB PDA
Adapter is required.
• Macintosh is a registered trademark of Apple
Computer, Inc.
• Keyspan is a trademark of InnoSys Inc.
Compartment Door
Recording
Safety Hole
Battery Cover
Reels
Hole
Sliding Latch
