EN
51
D.S.C. PLAYBACK
Basic Playback
Still images shot using this camcoder are automatically
numbered, then stored in numerical order in the built-in
memory. You can view the still images stored in memory,
one at a time, much like flipping through a photo album.
SELECT MODE
1
Set the System Select Switch to “D.S.C.”, then set
the Power Switch to “PLAY”.
•The still image stored in memory is displayed.
•When no still image is stored in memory, the
screen becomes blue.
PLAY BACK
2
Press “W” or “T” located on the Page Button to
select the still image you want to view.
•Each time “W” is pressed, the page goes back,
while each time “T” is pressed, the page goes next.
•Even if you shoot a new picture after playing back
a still image with a low number, this will not
overwrite the existing picture because new
pictures are automatically stored after the still
image most recently stored in memory.
NOTES:
●
The playback picture can also be viewed on a
connected TV (
Z
pg. 42). Camcorder operation is the
same as described in this section.
●
When viewing a playback picture on a connected TV,
it may jitter slightly.
Page Button
To move the
page next
To move the
page back
System Select Switch
Viewfiner
