JVC GR-AX657UM Page 19 Instructions Manual Download

Page: 19 / 60

RECORDING

FEATURE:

Quick Review

PURPOSE:

To check the end of the last recording.

OPERATION:

Press “

” and release quickly during the Record–

Standby mode.

Tape is rewound for about 2 seconds and played
back automatically, then pauses in Record–Standby
mode for the next shot.

NOTE:

Distortion may occur at the start of playback. This is
normal.

FEATURE:

Retake

PURPOSE:

To re-record certain segments.

OPERATION:

Make sure the camcorder is in the Record–Standby
mode.

Press either

RETAKE

to reach the start point for new

recording. Pressing “F” forwards the tape and
pressing “R” reverses it.

Press the Recording Start/Stop Button to start
recording.

NOTE:

Noise bars appear and pictures may become
monochrome or darken during Retake. This is normal.

FEATURE:

5 Sec. Rec (5-sec. Recording)
(GR-AX857/AX657 only)

PURPOSE:

To record a scene for 5 seconds, providing quick scene
transitions like those seen in TV programs.

OPERATION:

Make sure the recording mode is set to “SP”.

During Record–Standby, press

5 SEC. REC

. “

5S”

appears and 5 Sec. Rec is reserved.

Press the Recording Start/Stop Button. Recording
starts, and after 5-second recording is finished, the
camcorder reenters the Record–Standby mode
automatically.

To cancel the 5 Sec. Rec. function, press

5 SEC. REC

again so that “

5S” disappears.

NOTE:

Fade/Wipe (

pg. 23) cannot be activated by

pressing

5 SEC. REC

PAUSE

RETAKE (R/F) Button

Display

5 Sec. Rec mode indicator

5 SEC. REC Button

Summary of Contents for GR-AX657UM




























































Search results

Summary of Contents for GR-AX657UM

Reviews:

Related manuals for GR-AX657UM

Brands by name

Popular brands

JVC GR-AX657UM, Instructions Manual

Search results

Summary of Contents for GR-AX657UM

Reviews:

Related manuals for GR-AX657UM

Brands by name

Popular brands