JVC GR-AX260 Page 6 Instructions Manual Download

Page: 6 / 48

GETTING STARTED

Power

This camcorder’s 3-way power supply system lets you
choose the most appropriate source of power.

NOTES:

●

No function is available without power supply.

●

Use only specified power supply.

●

Do not use provided power supply units with other equipment.

CHARGING THE BATTERY PACK

SUPPLY POWER

Connect the charger’s AC power cord to a wall
outlet. The power indicator lights.

ATTACH BATTERY PACK

Align the marks and slide the battery pack in the
direction of the arrow until it locks in place.
The CHG. indicator lights.

DETACH BATTERY PACK

When charging is completed, the END indicator
lights. Slide the battery pack opposite the direction
of the arrow.

BATT. PACK

CHARGE

DISCHARGE

BN-V12U

approx. 1 hr. 10 min.

approx.
3 hrs. 30 min.

BN-V22U

approx. 2 hrs. 10 min.

approx. 7 hrs.

BN-V25U

approx. 2 hrs. 40 min.

approx. 10 hrs.

REFRESH indicator

REFRESH switch

CHG. (charge) indicator

To AC outlet

Marks

END
indicator

Hook on.

Push in.

BATT. RELEASE

POWER
indicator

**REFRESH

The AC power adapter features a REFRESH function that
allows you to fully discharge the battery pack before
recharging.
To discharge the battery . . .

.... attach the battery pack to the adapter as shown in the

illustration to the left. Then push REFRESH. The
REFRESH indicator lights when discharging starts,
and goes out when discharging is complete.

USING THE BATTERY PACK

ATTACH BATTERY PACK

Hook its top end to the camcorder and push the
battery pack in until it locks in place.

DETACH BATTERY PACK

Slide BATT. RELEASE and pull out the battery pack.

BATT. PACK

APPROXIMATE RECORDING TIME

GR-AX460/AX260

BN-V12U

1 hr. 5 min. (35 min.)

BN-V22U

2 hrs. 15 min. (1 hr. 25 min.)

BN-V25U

3 hrs. (1 hr. 50 min.)

( ) : when the video light is on (GR-AX460 only).

Summary of Contents for GR-AX260
















































Search results

Summary of Contents for GR-AX260

Reviews:

Related manuals for GR-AX260

Brands by name

Popular brands

JVC GR-AX260, Instructions Manual

Search results

Summary of Contents for GR-AX260

Reviews:

Related manuals for GR-AX260

Brands by name

Popular brands