background image

24

 EN

RECORDING

  Advanced Features (cont.)

FOCUS

AUTO

Adjusts focus automatically.

MANU

Allows you to adjust focus manually (

Z

 pg. 26, 27).

EXPOSURE

AUTO

Adjusts exposure automatically.

MANU

Allows you to adjust exposure manually (

Z

 pg. 28).

DATE/TIME

Allows you to set the current date and time (

Z

 pg. 7).

TELE MACRO

Usually the distance to a subject where the lens is in focus
depends on the zoom magnification. Unless there is a distance
more than 1m to the subject, the lens is out of focus at the
maximum telephoto setting. When set to “ON”, you can shoot a
subject as large as possible at a distance of approx. 60 cm.
•Depending on the zoom position, the lens may go out of focus.

TAPE LENGTH

Allows you to set the tape length depending on the tape used (

Z

 pg. 8).

M.W.B.

This camcorder’s Automatic Colour Temperature system senses
the colour temperature of the ambient lighting for automatic
white balance adjustment. However, precise colour adjustment
is not possible under the following conditions:
•When an object is in various shades of the same colour.
•When a predominantly red or brown object is being shot

outdoors.

In these cases, use the camcorder’s built-in preset filters for
white balance adjustment (

Z

 pg. 29).

ZOOM SPEED

Allows you to set the zooming speed (

Z

 pg. 14).

OFF

ON

AUTO

: FINE

: CLOUD

: HALOGEN

MWB

FAST

SLOW

Menu Screen Explanations

Summary of Contents for GR-AX11





















































Reviews: