background image

VIDEO RECORDING

18 

EN

MasterPage: Left

LCD Monitor And Viewfinder

While using the LCD monitor:

Make sure the viewfinder is pushed back in. Pull 
on the end 

 of the LCD monitor and open the 

LCD monitor fully. It can rotate 270° (90° 
downward, 180° upward).

While using the viewfinder:

Make sure the LCD monitor is closed and 
locked. Pull out the viewfinder fully. 

NOTES:

The image will not appear simultaneously on the 
LCD monitor and the viewfinder. When the 
viewfinder is pulled out while the LCD monitor is 
opened, you can select which one to use. Set 
“PRIORITY” to the desired mode in SYSTEM 
Menu. (

pg. 22, 25)

Coloured bright spots may appear all over the 
LCD monitor or the viewfinder. However, this is not 
a malfunction. (

pg. 39)

Zooming

Produces the zoom in/out effect, or an 
instantaneous change in image magnification.

Zoom In

Slide the Power Zoom Lever towards “T”.

Zoom Out

Slide the Power Zoom Lever towards “W”.

The further you slide the Power Zoom Lever, the 
quicker the zoom action.

 

NOTES:

Focusing may become unstable during Zooming. 
In this case, set the zoom while in Record-
Standby, lock the focus by using the manual focus 
(

pg. 29), then zoom in or out in Record mode.

Zooming is possible to a maximum of 800X, or it 
can be switched to 25X magnification using the 
optical zoom. (

pg. 23)

Zoom magnification of over 25X is done through 
Digital image processing, and is therefore called 
Digital Zoom.

During Digital zoom, the quality of image may 
suffer.

Macro shooting (as close as approx. 5 cm to the 
subject) is possible when the Power Zoom Lever 
is set all the way to “W”. Also see “TELE MACRO” 
in MANUAL Menu on page 24.

When shooting a subject close to the lens, zoom 
out first. If zoomed-in in the auto focus mode, the 
camcorder may automatically zoom out 
depending on the distance between the 
camcorder and the subject. This will not occur 
when “TELE MACRO” is set to “ON”. (

pg. 24)

180˚ 

90˚

10 x W

T

1 xW

T

1 0 xW

T

20xW

T

40xW

T

Digital zoom zone

Zoom in (T: Telephoto)

Zoom out (W: Wide angle)

25X (optical) zoom zone

Approximate zoom ratio

GR-D240PAL_05Video.fm  Page 18  Friday, November 19, 2004  4:11 PM

Summary of Contents for GR-240EZ

















































Reviews: