background image

ENGLISH

5

Remote controller

This section is only for KD-SX745.

KD-SX695 and KD-SX696 can also be remotely
controlled as instructed here (with an optionally
purchased remote controller). We recommend
that you use remote controller RM-RK50 with
your unit.

3

• Selects the preset stations while listening to

the radio.
Each time you press the button, the preset
station number increases, and the selected
station is tuned in.

• While playing an MP3 disc on an MP3-

compatible CD changer;
– Skips to the previous disc if pressed briefly.
– Skips to the previous folder if pressed and

held.

Note:

While playing a CD on a CD changer, this
always skips to the previous disc.

4

Functions the same as the control dial on the
main unit.

Note:

These buttons do not used for adjusting
“CLOCK H,” “CLOCK M,” “LEVEL,” and
“EXT IN” (see pages 8 and 17).

5

Selects the sound mode (C-EQ: custom
equalizer).
Each time you press the button, the sound
mode (C-EQ) changes.

6

Selects the source.
Each time you press the button, the source
changes.

7

• Searches for stations while listening to the

radio.

• Fast-forwards or reverses the track/file if

pressed and held while listening to a disc.

• Skips to the beginning of the next track/file

or goes back to the beginning of the current
(or previous) tracks/files if pressed briefly
while listening to a disc.

1

• Turns on the unit if pressed when the unit is

turned off.

• Turns off the unit if pressed and held until

“SEE YOU” appears on the display.

• Drops the volume level in a moment if

pressed briefly.
Press again to resume the volume.

2

• Selects the band while listening to the radio.

Each time you press the button, the band
changes.

• While playing an MP3 disc on an MP3-

compatible CD changer;
– Skips to the next disc if pressed briefly.
– Skips to the next folder if pressed and held.

Note:

While playing a CD on a CD changer, this
always skips to the next disc.

SOUND

VOL

VOL

SOURCE

R

F

U

D

ATT

EN04-06KD-SX745_695_696[U]f.p65

4/7/03, 4:54 PM

5

Summary of Contents for GET0133-001B

































Reviews: