background image

9

ENGLISH

What you can do with RDS

RDS (Radio Data System) allows FM stations to
send an additional signal along with their regular
programme signals. For example, the stations send
their station names, as well as information about
what type of programme they broadcast, such as
sports or music, etc.
Another advantage of RDS function is called
“Enhanced Other Networks.” The EON indicator
lights up while receiving an FM station with the
Enhanced Other Networks data. By using these
data sent from a station, you can tune into a different
station of a different network broadcasting your
favorite programme or traffic announcement while
listening to another programme or to another source
such as tape.

By receiving the RDS data, this unit can do the
following:
• Tracing the same programme automatically

(Network-Tracking Reception)

• Standby Reception of TA (Traffic

Announcement) or your favorite programme

• PTY (Programme Type) search
• And some other functions

Tracing the same programme
automatically (Network-Tracking
Reception)

When driving in an area where FM reception is not
good, the tuner built in this unit automatically tunes
into another RDS station, broadcasting the same
programme with stronger signals. So, you can
continue to listen to the same programme in its
finest reception, no matter where you drive. (See
the illustration on the next page.)
Two types of the RDS data are used to make
Network-Tracking Reception work correctly — PI
(Programme Identification) and AF (Alternative
Frequency).
Without receiving these data correctly from the RDS
station you are listening to, Network-Tracking
Reception will not operate.

Using Network-Tracking Reception

For KS-FX473R/KS-FX470R:

Press and hold TP RDS (Traffic Programme/
Radio Data System) for more than 1 second.
Each time you press and hold the button,
Network-Tracking Reception modes change as
follows:

For KS-F363R/KS-F360R:
Press RDS (Radio Data System).
Each time you press the button, Network-
Tracking Reception change as follows:

Mode 1
The AF indicator lights up but the REG indicator
does not.
Network-Tracking Reception is activated with
Regionalization set to “off.”
Switches to another station within the same
network when the receiving signals from the
current station become weak.

In this mode, the programme may differ from the one
currently received.

Mode 2
Both the AF indicator and the REG indicator light
up.
Network-Tracking Reception is activated with
Regionalization set to “on.”
Switches to another station, within the same
network, broadcasting the same programme
when the receiving signals from the current
station become weak.

Mode 3
Neither the AF indicator nor the REG indicator
lights up.
Network-Tracking Reception is deactivated.

AF indicator

REG indicator

Mode 1

Mode 2

Mode 3

Mode 1

Mode 2

Mode 3

         RDS OPERATIONS

EN09-14.KS-FX473[E]f

10/19/01, 9:01 PM

9

Summary of Contents for GET0054-001A





























Reviews: