JVC GC-S5 Instructions Manual Download Page 57

Page: 57 / 100

BASIC

PHOTOGRAPHY

Use the [

] or [

] button to

select the image to be erased
and press the [MENU/EXE]
button.

• The confirmation screen appears.
• In step 1, press the [DISP] button to

select the image to be erased in the
same way as in 9-shot multi-frame
playback (

P.29, 53).

Press the [MENU/EXE]
button.

• The image is erased and the menu

screen reappears.

CAUTIONS

• If “

PROTECTED FRAME” is displayed, the image cannot be erased.

- To remove the protection on that image: Switch to Protect mode (

P.76) to remove

the protection.

- To erase other images: In Playback mode (

P.42), select the images to be erased

and then go back into Erase mode to erase the frames.

∗

Note that using any buttons other than the Mode dial when “

PROTECTED FRAME” is

displayed can cause a malfunction.

To Cancel Single-Frame Erase

In step 4, press the [

] button before you press [MENU/EXE] button.

To erase another frame,
repeat the procedure from
step 2.

ERASE

FRAME

D S C 0 0 0 1 0

FRAME

EXE

ERASE

FRAME

D S C 0 0 0 1 0

OK?

EXE

CANCEL

< >

Summary of Contents for GC-S5




































































































Search results

Summary of Contents for GC-S5

Reviews:

Related manuals for GC-S5

Brands by name

Popular brands

JVC GC-S5, Instructions Manual

Search results

Summary of Contents for GC-S5

Reviews:

Related manuals for GC-S5

Brands by name

Popular brands