JVC GC-QX3HD Instructions Manual Download Page 18

Page: 18 / 104

GETTING STARTED

Charging the Battery

Charge the battery with the AC adapter (provided).

Power outlet

Battery BN-V37

Power cord

Power lamp

Charging lamp

Finish lamp

AC adapter
(AA-V37)

Connect the AC adapter's power cord to a
power outlet.

•The “Power” lamp lights.

Install the battery.

•The “Charging” lamp lights.
•Charging is complete when the “Charging”

lamp turns off and the “Finish” lamp lights.

Remove the battery.

NOTES:

●

Approximate charging time is 90 minutes for one
battery (BN-V37). (at a temperature from 10°C to
35°C or from 50°F to 95°F)

●

Charging is not possible if the DC cord is

connected to the AC adapter.

●

The battery is no longer usable, if the shooting

time is short with the battery fully charged.
Replace the battery with a new one.

●

The Power dial can be turned to “ON” acciden-

tally, when you put the camera in a bag, etc.
If the camera is left turned on, the battery will be
used up and you will not be able to shoot a
photo.

It is recommended to remove the battery

from the camera when you carry the camera.

Remove the battery.

Approximate number of pictures that can be taken
with a fully charged battery (BN-V37)

Maximum number:

50 pictures

(when shooting every 30 seconds at normal
temperature, with the flash, zooming, auto focus
and the LCD screen turned on)

NOTE:

●

Depending on the settings of the flash, zooming,
etc., the number of pictures that can be taken may
decrease.

Summary of Contents for GC-QX3HD








































































































Search results

Summary of Contents for GC-QX3HD

Reviews:

Related manuals for GC-QX3HD

Brands by name

Popular brands

JVC GC-QX3HD, Instructions Manual

Search results

Summary of Contents for GC-QX3HD

Reviews:

Related manuals for GC-QX3HD

Brands by name

Popular brands