21
Disc Direct Recording
Everything on the disc goes onto the tape in the order it is on
the disc, or according to the order you have set in Program
Play.
On the unit ONLY:
1
Put a recordable cassette in with the
exposed part of the tape down.
2
Load a disc.
• If the current playing source is not the CD player,
press CD
3
/
8
, then
7
before going to the next step.
— If you do not want pauses of about 4 seconds
recorded between selections, press CD
3
/
8
twice.
Otherwise, a non-recorded pause will be
automatically inserted between selections.
• If you want to record on both sides of a tape, see “To
record on both sides—Reverse Mode.”
3
Press REC (recording).
The REC (recording) indicator lights up on
the display and recording starts.
After recording, the CD player and cassette
deck automatically stop.
To stop while recording,
press
7
.
The tape stops after 4 seconds.
To remove the cassette,
press PUSH OPEN
0
on the unit.
• If the tape is recording, stop it first.
DO NOT open the cassette holder when the tape is
running.
To record on both sides—Reverse Mode
Press REV.MODE (reverse mode) repeatedly
until
or
is lit.
• When using the Reverse Mode for Disc Direct
Recording,
lights up and start recording in
the forward (
3
) direction first. When the tape reaches its
end while recording a song in the forward direction (
3
),
the last song will be re-recorded at the beginning of the
reverse side (
2
).
If you start recording on the reverse side (
2
), recording
will stop when recording is done only on one side (reverse)
of the tape.
When making Sleep Timer settings while doing Disc
Direct Recording
Set enough time to allow for the disc to finish playing; otherwise,
the power will go off before recording is completed.
One Track Recording
This recording method is convenient when you record tracks
while playing the disc. You can record just your favorite
songs on the tape.
On the unit ONLY:
1
Put a recordable cassette in with the
exposed part of the tape down.
2
Play the track on the disc you wish to
record.
3
Press REC (recording).
The CD player returns to the beginning of that
track and the track is recorded on the tape.
After recording, the CD player and cassette
deck automatically stop.
4
Repeat steps
2
and
3
to record other tracks
you want.
To stop while recording,
press
7
.
The tape stops after 4 seconds.
To remove the cassette,
press PUSH OPEN
0
on the unit.
• If the tape is recording, stop it first.
DO NOT open the cassette holder when the tape is
running.
REV.
MODE
0
REC
REC
0
EN20-26_UX-J60&50[B]f.pm6
02.12.23, 9:34 AM
21
Summary of Contents for FS-J50
Page 30: ...MEMO ...
Page 31: ...MEMO ...
Page 32: ...VICTOR COMPANY OF JAPAN LIMITED EN 0103MWMMDWJEM 2003 VICTOR COMPANY OF JAPAN LIMITED ...
