SETTINGS
65
ENGLISH
Equalizer
Flat/Hard Rock/R&B/Pop/Jazz/Dance/Country/Reggae/Classic/User1/User2/User3
☞
[57]
Sound
Menu items
Selectable settings, [reference page]
Fader/Balance
Adjust fader—speaker output balance between the front and rear speakers.
• Upmost—front only (F6)
• Downmost—rear only (R6)
When using a two-speaker system, set the fader to the center (
0
).
Adjust balance—speaker output balance between the left and right speakers.
• Leftmost—left only (L6)
• Rightmost—right only (R6) Initial
0
Volume Adjust *
5
Adjust and store auto-adjustment volume level for each source, comparing to
the FM volume level. The volume level will automatically increase or decrease
when you change the source.
–12
to
+12
; Initial
00
Subwoofer Level
Adjust the subwoofer output level. Level:
–06
to
+08
; Initial
00
High Pass Filter
Through
: Select when the subwoofer is not connected.
On
: Select when the subwoofer is connected.
Crossover
Adjust the crossover frequency between the front/rear speakers and the
subwoofer.
80Hz
,
120Hz
,
150Hz
Amplifier Gain
You can change the maximum volume level of this unit.
Off
: Deactivates the built-in amplifier.
Low
: VOL 00 to 30 (Select this if the maximum power of the speakers is less
than 50 W.)
High
: VOL 00 to 50
*
5
For digital sources: you can make the adjustments separately depending on the audio format—Dolby Digital/DTS
and the others.
Fader/Balance
Back
Exit
Reset
Fader 0
Balance 0
The procedure for setting an item is shown on page 59.
EN_KW-AVX810[E]f.indb 65
EN_KW-AVX810[E]f.indb 65
08.1.25 7:46:10 PM
08.1.25 7:46:10 PM
