1-30 (No.MA161)
4.6
NAVI engineer mode
Setup to the NAVI engineer mode
Turn on the power. Select to the [NAVI] mode
Press the key [SEL] [NAVI/AV] [OK] over the two seconds.
MENU
1.DIL FILE COPY 4.GPS RAW DATA
2.NAVILOG COPY 5.SIMULATION
DIL FILE COPY (For technical examination)
3.SENSOR DATA 6.SYS_DATA COPY
Copy the log data file to SD card.
NAVI ENGINEERING
NAVILOG COPY Copy log data to SD card at navigation guidance.
(Using troubleshooting to the designer)
SENSOR DATA
Learning Level:* Level(0-4)
Gyro:**** Gyro value (0000-4096)
**cm/pls: Centimeter per one pulse
Speed:**km/h Speed
**,*pps Pulse count of speed
Backgear:****** Direction
Low or High Position of back gear
GPS SAT:* Receive count of GPS saterite
HDOP:*,* HDOP value(0.0-99.9)
GPS LAW DATA (No use)
SIMULATION Change ON/OFF of the simulation mode.
Simulation mode : Using simulate with out sensor.
(It can use uncompleted Vp calibration.)
Display the sub menu after select the [SIMULATION]
1.OFF
2.ON
SIMULATION
Display after ON select.
SIMULATION MODE
JVC
The origin in simulation mode is determined as follows by language setup.
Language
Origin
DANSK
Copenhagen
DEUTSH
Berlin
ENGLAND UK
London
ENGLAND US
London
ESPANOL
Madrid
FRANCAIS
Paris
ITALIANO
Roma
NEDERLANDS
Amsterdam
SVENSKA
Stockholm
*Resetting the SIMULATION mode by the [ACC off] or power off or [RESET].
SYS_DATA COPY (For technical examination)