2
ENGLISH
How to reset your unit
Press the reset button on the
control panel using a ball-
point pen or a similar tool.
This will reset the built-in
microcomputer.
Your preset adjustments—such as preset
channels or sound adjustments—will also be
erased.
Important!
How to read this manual:
To make the explanations as simple and
easy-to-understand as possible, we have
adapted the following methods:
•
Some related tips and notes are
explained later in the sections “More
about This Receiver” (see page 59), but
not in the same section explaining the
operations.
If you want to know more
about the functions, or if you have a doubt
about the function, go to the section and
you will find the answers.
Press briefly.
Press repeatedly.
or
Press and hold until your
desired response begins.
Hold
Press either
one.
• Button and touch panel operations are
explained only with the illustrations as
follows:
Warning:
If you need to operate the receiver while
driving, be sure to look ahead carefully or
you may be involved in a traffic accident.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2.
CAUTION:
Do not open the top cover. There are no user serviceable parts inside the unit;
leave all servicing to qualified service personnel.
3.
CAUTION:
Visible and invisible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and
to obtain the best possible performance from the unit.
Cautions:
• Do not operate the touch panel using a
ball-point pen or a similar tool with the
sharp tip (it may damage the touch panel).
• If the temperature inside the car is below
0°C, the movement of animation and text
scroll will be halted on the display to
prevent the display from being blurred.
appears on the display.
When the temperature increases, and the
operating temperature is resumed, these
functions will start working again.
01-05_KD-LHX501_2_Ef.p65
2/11/04, 8:07 PM
2