54
ENGLISH
Sound
Menu items
Selectable settings, [reference page]
Fader/Balance
Adjust fader—speaker output balance between the front and rear speakers.
• Upmost—front only
• Downmost—rear only
When using a two-speaker system, set the fader to the center (
00
).
Adjust balance—speaker output balance between the left and right speakers.
• Leftmost—left only
• Rightmost—right only
Volume Adjust
Adjust and store auto-adjustment volume level for each source, comparing to
the FM volume level. The volume level will automatically increase or decrease
when you change the source.
–12
to
+12
; Initial
00
• For digital sources: You can make the adjustments separately depending on
the audio format—Dolby Digital/DTS and the others.
Subwoofer Level
*1
Adjust the subwoofer output level.
–06
to
+08
; Initial
00
High Pass Filter
Through:
Select when the subwoofer is not connected.
On:
Select when the subwoofer is connected.
Crossover
Adjust the crossover frequency between the front/rear speakers and the
subwoofer.
80Hz
,
120Hz
,
150Hz
Amplifier Gain
You can change the maximum volume level of this unit.
Off:
Deactivates the built-in amplifier.
Low Power:
Select this if the maximum power of the speakers is less than
50 W.
High Power
Rear Speaker
*2
You can activate/deactivate the rear speakers.
Off
,
On
Disc Surround
*3
Menu items
Selectable settings, [reference page]
Surround Off
Select to deactivate the surround function.
Surround On
Select to activate the surround function.
☞
[26]
Auto
,
Through
,
Dolby PL
II
Movie
,
Dolby PL
II
Music
• When you select <Dolby PL
II
Music>, you can adjust <Panorama> and
<Center Width>.
*4
Adjusts fader
Adjust balance
EN_KD-AVX22[E]3.indb 54
EN_KD-AVX22[E]3.indb 54
08.1.23 6:45:39 PM
08.1.23 6:45:39 PM
