1-22 (No.MB658<Rev.001>)
4.3
TEST MODE
4.3.1 Mode transition
It shall be in the mode in normal POWER ON and prepare five modes.
(1) The test mode which enters by the receive of remote controller cord [STOP] + [POWER] + [1].
* It invalidate the whole test mode anything other than test remote controller cord [STOP] + [POWER] + [1].
(2) The version confirmation mode which enters by the receive of remote controller cord [STOP] + [POWER] + [10].
* The whole version confirmation mode invalidates wireless remote controller cord
[STOP] + [POWER] + [1], [STOP] + [POWER] + [2] and [STOP] + [POWER] + [ 10].
(3) The model exc act confirmation mode which enters by the reception of wireless remote controller cord [STOP] + [POWER] + [ 10].
* The whole model name + destination confirmation mode invalidates remote controller cord [STOP] + [POWER] + [1], [STOP]
+ [POWER] + [2] and [STOP] + [POWER] + [10].
* Only for in confirmation mode 5 indication and source DAB, it is decided that [UPPER] is specialized in a service mode Lite indication change.
(4) The temperature indication mode which enters by the receive of remote controller cord [STOP] + [POWER] + [2].
* The whole temperature indication mode invalidates remote controller cord [STOP] + [POWER] + [1],
[STOP] + [POWER] + [10] and [STOP] + [POWER] + [ 10].
Normal mode
Normal mode (Release the TEST MODE)
COLD
START
Temperature
indication mode
Model name
+
Destination
confirmation mode
Version confirmation mode 1
"Syscon & ROMCOLLE version"
Version confirmation mode 2
"Back end version"
Version confirmation mode 3
"DVD unit desti
REGION CODE"
Version confirmation mode 4
"DVD module information"
Version confirmation mode 5
"DAB module version"
DAB Micon version
V019-FF
UPPER
(DISPLAY) Key
UPPER
(DISPLAY) Key
UPPER
(DISPLAY) Key
UPPER
(DISPLAY) Key
UPPER (DISPLAY) Key
UPPER
(DISPLAY) Key
UPPER
(DISPLAY) Key
UPPER
(DISPLAY) Key
UPPER
(DISPLAY) Key
UPPER
(DISPLAY) Key
Any key in
UPPER (DISPLAY) Key
UPPER (DISPLAY) Key
"Tuner setting data"
Tun Set3
"Tuner setting data"
Tun Set2
"Tuner setting data"
Tun Set1
"DAB now status"
NOW_SEQ
"AUTMOD value,
DETMOD value,
MOD value"
DAB MODE
"Actual service ID"
SERVICE or Sid=
"Audio average error rate"
Audio Err
"FIC average error rate"
FIC Err
"Actual ensemble ID"
Eid
"gain mode, bandwidth
(RF setting value)"
RF Set
[STOP]
+
[POWER]
+
[10]
[STOP]
+
[POWER]
+
[10]
[STOP] + [POWER] + [10]
[STOP] + [POWER] + [1]
[STOP] + [POWER] + [1] or HARD RESET
[STOP] + [POWER] + [1] or HARD RESET
[STOP] + [POWER] + [10]
[STOP] + [POWER] + [10]
[STOP] + [POWER] + [10]
[STOP] + [POWER] + [10]
[STOP] + [POWER] + [0]
[STOP] + [POWER] + [0]
[STOP] + [POWER] + [2]
[STOP] + [POWER] + [2]
[STOP] + [POWER] + [ 10]
[STOP] + [POWER] + [10]
Transientness
4 sec.
Test mode
"FL & LED all ON"
Release the
"FL & LED all ON"
Continue the
Test mode (2)
