EN
Manual Recording
(Continued)
Aperture Priority Setting
You can add a blurring effect to the
background by setting the aperture value
(F-number).
1
Press A (Aperture Priority Setting).
2
Turn the adjustment dial to select one
of the following aperture value.
At the lower F-number (larger aperture
value), the background will be more
blurred. At the higher F-number (smaller
aperture value), the focus will be clearer for
both near and far objects.
F2.8 / F3.4 / F4.0 / F5.6
F4.5 when the zoom lever is set all the way
to T side.
3
Press SET.
NOTE
If the image is too bright, select a larger
F-number. If the image is too dark, select a
smaller F-number.
Manual Setting by the USER button
By assigning one of manual adjustment
functions that you frequently use to the
U (USER) button, you can access the function
quickly.
To assign a function to the USER button
1
Touch MENU.
2
Select [USER BUTTON SETTING].
3
Select the desired function.
You can select one of the following
functions. For details on each function, see
the pages given.
[ ] = default setting
•
[BACKLIGHT COMP.] (
Z
p. 50)
•
SCENE SELECT (
Z
p. 49)
•
PHOTOMETRY AREA (
Z
p. 50)
•
WB (
Z
p. 50)
•
FOCUS ASSIST (
Z
p. 49)
•
HIGH SPEED RECORDING*
1
(
Z
p. 52)
•
TIME-LAPSE RECORDING*
1
(
Z
p. 53)
•
SHUTTER MODE (
Z
p. 80)
•
CONT. SHOOTING SPEED (
Z
p. 84)
•
FLASH*
2
(
Z
p. 21)
•
SELF-TIMER*
2
(
Z
p. 79)
*
1
!
mode only
*
2
#
mode only
To make adjustment by the USER button
Operate as follows.
In the case of functions that are turned
on or off ([BACKLIGHT COMP.], etc.)
Pressing
U (USER) turns on or off the
function.
In the case of functions that
have settings to be selected
([SCENE SELECT], etc.)
1) Press
U (USER).
2) Turn the adjustment dial to adjust or
select a setting.
3) Press
SET.
4) Press
U (USER) again to quit the screen.