JVC DynaPix LT-26DX7BJ, Instructions Manual, Page: 47 / 72

46
Troubleshooting
(continued)
Problem Actions page
Error message
Functions
HDMI
Use the cable marked with HDMI logo.
No picture, no sound –
The recorder is recording another programme, or is playing.
“ No Recording Device
Busy”
–
The recorder is not ready for recording.
Check the videotape or DVD disc.
“ No Recording Media
Problem”
–
The displayed video cannot be recorded.
“ No Recording
Possible”
–
A problem occurs at the recorder.
“No Recording” –
DTV channels, EXT-4, EXT-5, EXT-6 inputs, and PC mode
cannot be selected in the sub-picture.
RGB input signal of EXT-1 and EXT-2 are not available in
dual-picture mode.
Some inputs cannot
be selected in the
sub-picture
–
Press
2
to start ACI again.
If you still receive the “ACI Error” after numerous tries,
press
3
to cancel ACI.
“ACI Error” –
Switch “Size” in “HDMI Setting” to “1” or “2”.
Wrong screen size 35
Check if the device is compliant with HDMI.
Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for
HDMI devices, or “Analogue” or “Auto” for DVI devices.
(Not available for “EXT-6”.)
No sound
–
35
Wait a little for the signal to stabilize when switching the
signal format for an “HDMI” device.
Green and distorted
screen
–
Is the T-V LINK compatible device connected to EXT-2?
Is the SCART CABLE “Fully Wired”?
Is the T-V LINK compatible device turned on?
After confi rming all the conditions above,
press “OK” button again.
“Feature Not Available”
48
48
–
Body05_EN.indd 46 Body05_EN.indd 46 1/19/2006 2:04:16 PM 1/19/2006 2:04:16 PM