JVC DT-V9L3DY - Broadcast Studio Monitor Instructions Manual Download Page 20

20

Maintenance

Unplug this product from the wall outlet before cleaning.

Screen

To avoid irreparable change in appearance of the screen such as uneven color, discoloration, scratches, be 
careful about the following:
•  Do not paste or stick anything using any glues or adhesive tapes.
•  Do not write anything on the screen.
•  Do not strike the screen with a hard object.
•  Avoid condensation on the screen.
•  Do not wipe the screen with solvent such as alcohol, thinner, or benzine.
•  Do not wipe the screen forcefully.

Wipe stains off the screen with a soft cloth. If the screen gets heavily stained, wipe it with a soft cloth soaked in 
water-diluted neutral detergent and wrung well, then wipe with a soft dry cloth.

Cabinet

To avoid the deterioration or damages of the cabinet such as its paint’s peeling away, be careful about the 
following:
•  Do not wipe the cabinet using solvent such as alcohol, thinner, or benzine.
•  Do not expose the cabinet to any volatile substance such as insecticides.
•  Do not allow any rubber or plastic in contact for a long time.
•  Do not wipe the cabinet forcefully.

Wipe stains off the cabinet with a soft cloth. If the cabinet gets heavily stained, wipe it with a soft cloth soaked in 
water-diluted neutral detergent and wrung well, then wipe with a soft dry cloth.

Ventilation openings

Use a vacuum cleaner to get rid of the dust around the intakes (all the openings). If a vacuum cleaner is not 
available, use a cloth and wipe it off. Leaving the dust around the intakes may prevent proper temperature control 
and cause damage to the product.

DT-V9L3D_J_en.indb   20

DT-V9L3D_J_en.indb   20

09.8.7   1:30:38 PM

09.8.7   1:30:38 PM

Summary of Contents for DT-V9L3DY - Broadcast Studio Monitor
























Reviews: