6
Daily Operations / Connections
7
Front panel
w
AREA MARKER button/lamp
Activates/deactivates the settings of “MARKER
SELECT,” “ASPECT SELECT,” “R-MARKER
SELECT” and “R-ASPECT SELECT” in “AREA
MARKER” (
☞
page 10).
NOTE
• This function works when the picture is displayed in 16:9
aspect ratio.
• The functions do not work when “MARKER SELECT”
or “R-MARKER SELECT” is set to “OFF” in “AREA
MARKER.”
e
SAFETY MARKER button/lamp
Activates/deactivates the settings of “ASPECT
SELECT,” “R-ASPECT SELECT,” “SAFETY
MARKER” and “R-SAFETY MARKER” in “AREA
MARKER” (
☞
10 page).
NOTE
• This function does not work when displaying the picture
in the 1:1 mode.
• The functions do not work when “SAFETY MARKER”
or “R-SAFETY MARKER” is set to “OFF” in “AREA
MARKER.”
r
SCREENS CHECK button/lamp
Displays only the selected element (R, G, or B) of
the video signal.
• Each time you press this button, the screen
changes in the following order.
• The screen changes as above also when “SCR
CHECK” is controlled with MAKE/TRIGGER
system (
☞
“External Control” on page 14).
t
ASPECT button/lamp
Changes the aspect ratio of the picture from 4:3 to
16:9.
• To return to 4:3, press the button again.
• Use this function when the picture of 16:9 aspect
ratio is squeezed into 4:3 format signal.
NOTE
This function does not work when displaying the picture in
the 1:1 mode.
y
I / P MODE button/lamp
Selects a proper mode corresponding to the input
picture.
• Each time you press the button, the mode
changes as follows.
• The mode changes as above also when
“I / P MODE” is controlled with MAKE/TRIGGER
system (
☞
“External Control” on page 14).
NOTE
Memorized for each input.
u
T.C. (time code) button/lamp
Displays the time data (time code) contained in the
SDI signal.
i
INPUT SELECT buttons/lamps
Selects an input.
SDI 1
: HD/SD SDI (IN 1) terminal
SDI 2
: HD/SD SDI (IN 2) terminal
DVI
: DVI-D (HDCP) terminal
COMPO. / RGB
: COMPO. / RGB terminal
VIDEO 1
: VIDEO (INPUT 1) terminal
VIDEO 2
: VIDEO (INPUT 2) terminal
• The lamp for the selected input lights.
o
Power lamp
Unlit
: The monitor is completely
off (the AC plug is not
connected).
Lights in Green
: The monitor is on.
Lights in orange
: The monitor is off (standby).
Flashes in orange
: The monitor is in the suspend
mode.
;
Standby button
Turns on and off (standby) the monitor.
NOTE
To disconnect the mains line completely, unplug the AC
plug from the wall outlet.
Tally lamp
This lamp is controlled by the tally function
of MAKE/TRIG. terminal (
☞
“FUNCTION
SETTING” on page 12 and “External
Control” on page 14).
NOTE
“NO EFFECT” is displayed when you press a button which is not available for the current input or signal format (the lamp lights even when the function does not actually work).
The illustration of the monitor is of DT-V24L1D.
6
CONTRAST adjustment knob
Adjusts the picture contrast.
7
MUTING button
Mutes the sound when a menu screen is not
displayed.
• To cancel the function, press the button again or
turn the VOLUME adjustment knob.
8
Menu select buttons (
¥ ¥ ¥
)
When a menu screen is displayed
\
Selects or adjusts menu items.
☞
“Menu Operations” on page 7
When no menu screen is displayed
\
Selects the audio channels of EMBEDDED
AUDIO (DT-V24L1D and DT-V20L1D only).
☞
“Audio Channel Selection” on page 7
To display the set-up menu
\
Press button while pressing button.
☞
“Menu Operations” on page 7
9
MENU button
Displays the main menu.
☞
“Menu Operations” on page 7
p
COLOR OFF button/lamp
Displays only the luminance signal.
q
1:1 button/lamp
Displays the picture in the original resolution of the
input signal.
NOTE
• This function does not work when the input video signal
has higher resolution than the resolution of the panel
(DT-V20L1D and DT-V20L1 only).
• The aspect ratio of the picture may change depending on
the input signal.
1
Speakers (stereo)
The speakers emit the same audio signal output
from AUDIO ASSIGN (MONITOR OUT) terminals.
☞
“
8
AUDIO ASSIGN (MONITOR OUT) terminals”
on page 8
2
VOLUME adjustment knob
Adjusts the speaker volume.
3
PHASE adjustment knob
Adjusts the picture hue.
4
CHROMA adjustment knob
Adjusts the picture color density.
5
BRIGHT adjustment knob
Adjusts the picture brightness.
Normal screen
Red screen
Green screen
Blue screen
DT-V24L1 and DT-V20L1 do not have
u
, SDI 1 and SDI 2 buttons/lamps (
i
).
DT-V2420L1D_UA_R.indd 6
DT-V2420L1D_UA_R.indd 6
06.11.17 10:40:14 AM
06.11.17 10:40:14 AM
