11
Audio Channel Selection
Select audio channels emitted from the speakers (L/R) and the AUDIO (MONITOR OUT)(OUT1(L)/OUT2(R) terminals, when EMBEDDED AUDIO
signals come in to the SDI terminal and SDI input is selected.
●
You have to choose a group of selectable audio channels before the channel selection (
☞
“E.AUDIO GROUP” in “AUDIO SETTING” on page 16).
●
The setting is memorized for each input (SDI 1 and SDI 2).
1
Press or button when a menu is not displayed.
The screen for audio channel selection is displayed.
●
The screen for audio channel selection automatically disappears in about 30 seconds after the previous operation.
2
Press buttons to select the left (L ch) or right (R ch).
3
Press buttons to select an audio channel.
●
Each time you press the button, the audio channel changes according to the settings of “E.AUDIO GROUP.” (
☞
page 16)
4
Press MENU button.
●
The screen for audio channel selection disappears.
On the Information Display
The monitor displays the information below.
●
Configure the show/hide setting of each item in the menu. Use the T.C. button (
☞
r
on page 9) to configure
5
and
6
.
●
Select the position of the information display (
☞
“POSITION” in “INFORMATION” on page 20).
1
Audio level meter
●
You can check the conditions of the EMBEDDED AUDIO signals when “LEVEL METER ch” is set to “LINE” or “DIVIDE.”
●
Not displayed when “LEVEL METER ch” is set to “OFF.” (
☞
“AUDIO SETTING” on page 16)
2
Signal
format
●
Displayed when “STATUS DISPLAY” is set to “ON.” (
☞
“INFORMATION” on page 20)
●
For the contents displayed, see “Available signals” on page 29 and “Signal format” on page 12.
3
Source name assigned in “CHARACTER SET.”
(
☞
“INFORMATION” on page 20)
●
Displayed when “SOURCE ID” is set to “ON” or “AUTO.” (
☞
“INFORMATION” on page 20)
●
Displayed in large letters when “STATUS DISPLAY” is set to “OFF” or “AUTO.” (
☞
“INFORMATION” on page 20)
4
CRC error indication
●
Displayed when “CRC ERROR” is set to “ON.” (
☞
“INFORMATION” on page 20)
●
A red square is displayed when an error occurs.
5
Time
code
●
Press T.C. button (
☞
r
on page 9).
●
When the input signal includes no time code, “TC – –:– –:– –:– –” is displayed.
Selected item
Audio channel selection screen
Showing Input Signals
DTV17G15_LCT2698.indb 11
DTV17G15_LCT2698.indb 11
9/13/2012 4:58:17 PM
9/13/2012 4:58:17 PM
