JVC DT-V17G1, Instructions Manual

Page: 10 / 28

10
Daily Operations / Connections
(cont.)
7
Available signals
Video signals
No. Signal name
Signal format
shown in the status display
(
☞
page 7)
Input terminal
VIDEO
COMPO.(Analog
component)* 1
E. AUDIO SDI (IN 1, IN 2)* 2
DVI-D (HDCP)
(Digital component/digital RGB)
SD/HD (1.5G) 3G SDI DUAL LINK
1 NTSC NTSC √ — — — — —
2 PAL PAL √ — — — — —
3 B/W50 B/W50 √ — — — — —
4 B/W60 B/W60 √ — — — — —
5 480/60i 480/60i — √ √ — — √
6 480/59.94i 480/59.94i — √ √ — — √
7 576/50i 576/50i — √ √ — — √
8 480/60p 480/60p — √ — — — √
9 480/59.94p 480/59.94p — √ — — — √
10 576/50p 576/50p — √ — — — √
11 640 * 480/60p 640 * 480/60p — — — — — √
12 640 * 480/59.94p 640 * 480/59.94p — — — — — √
13 720/60p 720/60p — √ √ √ — √
14 720/59.94p 720/59.94p —
√ √ √
—
√
15 720/50p 720/50p —
√ √ √
—
√
16 720/30p 720/30p —
√ √ √
— —
17 720/29.97p 720/29.97p —
√ √ √
— —
18 720/25p 720/25p —
√ √ √
— —
19 720/24p 720/24p —
√ √ √
— —
20 720/23.98p 720/23.98p —
√ √ √
— —
21 1080/60i 1080/60i —
√ √ √ √ √
22 1080/59.94i 1080/59.94i —
√ √ √ √ √
23 1035/60i 1035/60i — √ * 3
√
— — √ * 3
24 1035/59.94i 1035/59.94i — √ *
4
√ — — √ *
4
25 1080/50i 1080/50i — √ √ √ √ √
26 1080/60p 1080/60p — — — √ √ √
27 1080/59.94p 1080/59.94p — — — √ √ √
28 1080/50p 1080/50p — — — √ √ √
29 1080/30p 1080/30p — √ √ √ √ √
30 1080/29.97p 1080/29.97p — √ √ √ √ √
31 1080/25p 1080/25p — √ √ √ √ √
32 1080/24p 1080/24p — √ √ √ √ √
33 1080/23.98p 1080/23.98p — √ √ √ √ √
34 1080/30psF 1080/30psf — √ *
3
√ *
3
√ √ —
35 1080/29.97psF 1080/29.97psf — √ *
4
√ *
4
√ √ —
36 1080/24psF 1080/24psf — √ √ √ √ —
37 1080/23.98psF 1080/23.98psf — √ √ √ √ —
38 1080/25psF 1080/25psf — — — √ √ —
* 1 Analog component signals are compatible with
Y on sync signals.
* 2 Compatible with EMBEDDED AUDIO signals.
* 3 The signal is recognized as 1080/60i, and the
status is displayed as “1080/60i.”
* 4 The signal is recognized as 1080/59.94i, and
the status is displayed as “1080/59.94i.”
√ : Acceptable
—: Not acceptable
The following signals are available for this monitor.
On the signal format
The following messages appear depending on
the type of input signals and their conditions.
When a DVI-D signal protected with HDCP is
input
\
“
*
” (at the end of the indication)
When no video signal comes in
\
“NO SYNC”
When a noncompliant video signal comes in
\
“Out of range”
When “COLOR SYSTEM” (
☞
“FUNCTION
SETTING” on page 16) is set to “AUTO”
and the noncompliant composite video
signals come in
\
“OTHERS”
DT-V17G1_EN.indd 10 DT-V17G1_EN.indd 10 09.12.3 7:55:16 PM 09.12.3 7:55:16 PM