Masterpage:Right+
EN
45
Filename [MX1S_07HDD Operation.fm]
BASIC OPERATIONS ON HDD DECK
Page 45
Saturday, 30 October 2004 16:18
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-minutes interval), and shuts the unit off after
recording is finished.
1
Press
7
on the unit to start recording.
2
Press
7
again to engage the ITR mode.
●
On the front display panel, “0:30” appears.
3
If you want to record for more than 30 minutes, press
7
to
extend the time. Each press extends recording time by 30 minutes.
NOTES:
●
You can only perform ITR using the
7
button on the unit.
●
When the recording capacity becomes full during timer recording or
Instant Timer Recording, the unit is automatically shut off.
Watch Another Program While Recording On The Unit
While recording is going on, you can watch another program on
the TV by using the TV’s tuner.
NOTE:
It is required that the remote control is set to be able to operate the TV
in advance. (
1
During recording, press
TV/VIDEO
to select TV mode if your
unit is connected to the TV via the RF connection.
●
VHS mode is disengaged, and the VIDEO indicator on the front
display panel lights off.
●
The program received on the TV’s tuner is displayed on the TV
screen.
2
Slide the
TV/CABLE/DBS/DVD
switch to
TV
.
3
Press
CH +/–
repeatedly to select the desired channel.
Elapsed Recording Time And Disc Remaining Time
Indication
During recording, press
DISPLAY
repeatedly until the desired
indication appears on the front display panel.
●
Each time you press
DISPLAY
, the time indication changes as
follows:
Elapsed recording time
]
Disc remaining time
]
Clock
]
(Back to
the beginning)
●
You can also check the disc remaining time by pressing
REMAIN
while the unit is stopped or recording is in progress. The list of disc
remaining times for all recording modes appears on the TV screen.
Second Audio Recording
This unit’s built-in MTS decoder enables reception of Multichannel
TV Sound broadcast. To record a SAP program received, set “2ND
AUDIO RECORD” to “ON”. (
NOTE:
When the channel is changed on the unit;
●
The “MONO” indicator appears on the screen for about 5 seconds if
the program is a monaural broadcast.
●
The “STEREO” indicator appears on the screen for about 5 seconds
if the program is a stereo broadcast.
●
Both “STEREO” and “SAP” indicators appear when a stereo program
is accompanied by SAP sound.
●
Both “MONO” and “SAP” indicators appear when the main audio on
the monaural broadcast is accompanied by SAP sound.
Recording Features
●
Turn on the unit.
●
Turn on the TV and select the video channel (or AV mode).
●
Slide the
TV/CABLE/DBS/DVD
switch to
DVD
.
●
Press
VHS/HDD/DVD SELECT
on the unit repeatedly or
HDD
on the remote so that the HDD lamp lights up on the unit.
7
CH +/
DISPLAY
VHS/HDD/DVD
SELECT
TV / VIDEO
REMAIN
DISPLAY
CH+/-
HDD
CABLE/DBS
DVD
TV
HDD Lamp
VIDEO
indicator lights off.
MX1S_00.book Page 45 Saturday, October 30, 2004 4:18 PM
