background image

Filename [MX1S_12Subsidiary.fm]

Masterpage:Left+

82

 

EN

SUBSIDIARY SETTINGS

Page 82Saturday, 30 October 2004  16:18

DISC PLAY SET UP

8

RESUME

 — OFF / 

ON

 / DISC RESUME

When this function is set to “ON” or “DISC RESUME”, you can use 
the resume function. (

pg. 29)

OFF

: You cannot use the resume function.

ON

: You can start playback from the resume point of the placed 

disc.

DISC RESUME

: The unit retains a memory of the resume points of 

the last 30 discs played back, even though they have been 
ejected.

NOTE:

“DISC RESUME” setting works on DVD VIDEO, VCD, SVCD and 
already finalized DVD-R/DVD-RW (video mode) discs. For other types 
of discs, the function under “ON” setting will be applied even if 
“RESUME” is set to “DISC RESUME”.

HDD SET UP

8

LIVE MEMORY

 — OFF / 30 MIN / 

1 HR

 / 3 HR

When this function is set to “30 MIN”, “1 HR” or “3 HR”, you can 
apply the selected time length to “Temporary recording for Live 
Memory” (

pg. 47).

DVD SET UP

8

SAVE AS LIBRARY

 — OFF / 

ON

When this function is set to “ON”, the recording information is 
automatically stored in the library. For details, refer to “Modify 
Library Information” (

pg. 68).

8

CONTINUOUS PLAY

 — OFF / 

ON

When this function is set to “ON”, multiple titles on a disc are 
played back continuously one after another.

8

VIDEO MODE RECORDING ASPECT

 — 

PRIORITIZE 4:3

 / 

PRIORITIZE 16:9

This is the setting for the aspect ratio used when you dub titles to 
DVD discs in video mode. If the titles you want to dub are recorded 
in both 16:9 and 4:3, you must select one aspect ratio.

PRIORITIZE 4:3

: If you select “PRIORITIZE 4:3”, even a title 

recorded in 16:9 is dubbed in 4:3.

PRIORITIZE 16:9

: If you select “PRIORITIZE 16:9”, even a title 

recorded in 4:3 is dubbed in 16:9.

8

VIDEO MODE RECORDING AUDIO

 — 

MAIN

 / SUB

This is the setting for the audio channel to be selected when 
dubbing titles to DVD discs in video mode. Select either one of the 
two settings if the titles to be dubbed have two audio channels.

MAIN

: Select this to dub the main channel.

SUB

: Select this to dub the sub channel.

8

MP3 & WMA / JPEG

 — 

MP3 & WMA

 / JPEG

You can select files to play back, when both MP3&WMA files and 
JPEG files are recorded on a disc.

MP3 & WMA

: Select this to play back MP3/WMA files.

JPEG

: Select this to play back JPEG files.

REC/PLAY SET UP

8

XP MODE REC AUDIO

 — 

DOLBY DIGITAL

 / LINEAR PCM

You can select the audio format when you record a title in XP 
mode. When this function is set to “LINEAR PCM”, you can obtain 
a high-quality audio sound.

DOLBY DIGITAL

: To record in Dolby Digital format.

LINEAR PCM

: To record in Linear PCM format.

8

2ND AUDIO RECORD — OFF /

 ON

When this function is set to “ON”;

If a SAP program is received, the SAP audio is recorded on L/R 
tracks. The main audio is not recorded.
If a non-SAP program is received, the main audio is recorded on L/
R tracks.

When this function is set to 

“OFF”, the SAP audio cannot be 

recorded.

NOTE:

When the channel is changed on the unit;

The “MONO” indicator appears on the screen for about 5 seconds if 
the program is a monaural broadcast.

The “STEREO” indicator appears on the screen for about 5 seconds 
if the program is a stereo broadcast.

Both “STEREO” and “SAP” indicators appear when a stereo program 
is accompanied by SAP sound.

Both “MONO” and “SAP” indicators appear when the main audio on 
the monaural broadcast is accompanied by SAP sound.

8

JUMP TIME

 — 

15 MIN

 / 30 MIN / 1 HR

You can locate a scene ahead of or behind the currently viewed 
one by jumping a selected time interval during playback (or Live 
Memory Playback) or recording (or Live Memory Recording). For 
details, refer to “Jump Search” (

pg. 49)

DISPLAY SET

8

SUPERIMPOSE 

— OFF / 

AUTO

When this function is set to “AUTO”, various operational indicators 
appear on the TV screen. Messages appear in the selected 
language. (

pg. 21)

OFF

: To turn off superimposed indications.

AUTO

: To superimpose operational indications for approximately 

five seconds just after the corresponding operation.

NOTES:

Even when “SUPERIMPOSE” is set to “OFF”, you can display the 
various operational indicators by pressing 

ON SCREEN

. To clear the 

operational indicators, press 

ON SCREEN

 again.

When you use this unit as the source player for editing, be sure to set 
“SUPERIMPOSE” to “OFF” before starting. (

pg. 76)

When you select “AUTO”, during playback, the operation mode 
indicators may be disturbed depending on the type of disc being 
used.

8

BLUE BACK

 — OFF / 

ON

When this function is set to “ON”, the TV screen becomes all blue 
when receiving a channel not in use.

NOTE:

When you want to receive an unstable channel with poor signals, set 
this function to “OFF”.

MX1S_00.book  Page 82  Saturday, October 30, 2004  4:18 PM

Summary of Contents for DR-MX1S





































































































Reviews: