background image

EN

17

GET OVER IT! – CONNECTION –

Composite Connection (With Cable Box Or DBS Receiver)

1

Disconnect the antenna from the TV.

2

Connect the antenna to the antenna input connector 
on the cable box or DBS receiver.

3

Connect the RF cable between the unit’s [VHF/UHF 
IN] connector to the antenna output connector on 
the cable box or DBS receiver.

4

Connect the supplied RF cable between the [VHF/
UHF OUT] connector on the rear panel of the unit 
and the TV’s antenna terminal.

5

Connect the supplied audio/video cable between the 
[VIDEO/AUDIO OUTPUT (DVD/VCR)] connectors 
on the unit and the TV’s audio/video input 
connectors.

NOTE:

If your TV is compatible with S-VIDEO signals,  connect the unit’s 
[S VIDEO OUTPUT] connector to the TV’s S-VIDEO input connector.

You can obtain high-quality S-VHS pictures.

If your TV is not stereo-capable, use the unit’s [AUDIO OUTPUT] 
connectors to connect to an audio amplifier for Hi-Fi stereo sound 
reproduction.

6

Connect the audio/video cable between the [VIDEO/
AUDIO INPUT (DVD/VCR)] connectors on the unit 
and the audio/video output connectors on the cable 
box or DBS receiver.

7

Plug the end of the AC power cord into an AC outlet. 
This unit performs Plug & Play Set automatically. 
(

pg. 19)

The clock and tuner channels will automatically be set when the 
antenna is connected and when the AC power cord is first 
connected to an AC outlet. (If “AUTO” and the channel indicator 
are displayed on the front display panel before the unit is 
powered on, the clock and tuner channels are being set 
automatically. Wait for the time to be displayed on the front 
display panel before turning on the unit.)

“LOADING” blinks on the front display panel when the AC plug of 
the AC power cord is connected into an AC outlet and it takes 
approximately 50 seconds for the unit to be turned on. This is not 
a malfunction.

Antenna or Cable

Matching transformer
(not supplied)

Coaxial cable

AC outlet

Flat feeder

AC power cord

To 75 ohm terminal

Audio/video cable

(supplied)

RF cable (not supplied)

To [VIDEO/AUDIO INPUT 
(DVD/VCR)]

RF cable

(not supplied)

To audio/video input

connectors

Back of cable box or 
DBS receiver

To antenna

input connector

To antenna output 
connector

To [VIDEO/

AUDIO OUTPUT

(DVD/VCR)]

Audio/video

cable

(not supplied)

To audio/video 
output connectors

Back of unit

TV

To [VHF/UHF 
OUT]

To [VHF/UHF IN]

RF cable
(supplied)

Summary of Contents for DR-MV5S




































































































Reviews: